Complete Set Professional Car SEAT COVERS Suitable for Mazda MX-30, Front, Rear and Related Headrests | ERGONOMIC in Black Breathable Suede Effect Fabric and Gray Pu Leather Details, WITH AIRBAG SYSTEM | Approved and TÜV Certified
" They adapt PERFECTLY to the seats of your Mazda MX-30, TOTAL Coverage, as if they are standard; Compatible with AIRBAG and RECLINABLE"
- EXTREME QUALITY | Ergonomic backrest with numerous layers of high-quality materials and chain stitching, for unparalleled comfort, even on longer journeys.
- STOP SWEAT | Numerous Layers of Breathable Material Allow Air to Circulate
- PERFECT FIT | Elegant and Modern Design, Renew the Interior of the Car with a Perfect Adherence to the Seats.
- EUROPEAN LEVEL CERTIFICATES | TÜV - Martindale Friction Test - Oeko Tex Standard 100
- EASY APPLICATION | Compatibility Tested - Installation Tutorial Available
- PROTECTION | Protects Stock Seats from Wear, Scratches and Dirt
THE PACKAGE INCLUDES:
13 PIECES
- 5 x Headrest Covers
- 2 x Front Seat Cover
- 2 x Front Backrest Covers
- 1 x Back Seat Cover
- 1 x Rear Backrest Cover
- 2 x Rear Backrest Side Covers (Side Trim for Folding Seats )
- 1 x Set of Metal Hooks
INFO:
Complete Set of Universal Car Seat Covers, Front and Rear with 5 Covers for Headrests, Black Suede Effect and Gray Pu Leather, offer Full Coverage of the current seats of your car with a perfect fit, Ergonomics Gives a High driving comfort by limiting perspiration thanks to breathability, at the same time they renew the interior and provide the passenger compartment with a modern and Elegant design, with a double function:
IF YOUR CAR SEATS ARE NEW They protect them from scratches, wear, dirt, especially in the case of transporting children and child seats, or pets, preserving them from premature wear and tear, and keeping the value of the car intact.
IF YOUR CAR SEATS ARE WORN, They Will Give The Cabin An Elegant And Luxurious Look As If It Was A New Car.
MAXIMUM QUALITY OF MATERIALS
Made with excellent materials and advanced sewing techniques. They have a 7-layer breathable padding: 3 non-slip layers, for perfect adherence to the underlying seat; 2 Layers of Ultra R23D Sponge Padding; 2 Layers of Special Breathable Fabric and Pu Leather; They guarantee maximum ergonomic orthopedic support for the back and seating comfort, making the driving experience pleasant, even on longer journeys, as well as sturdiness and long life.
MAXIMUM SAFETY, COMPATIBLE WITH AIRBAGS
They have a special stitching system, which does not hinder or decelerate the eventual opening of the seat airbag, for maximum travel safety
COMPATIBILITY TESTED, INSTALLATION GUIDE
The Special Aerofit Technology allows a Perfect Adaptability to the Seats Below.
They are Compatible for Folding, Partially Folding Rear Seats, with Center Armrest and Seat Belts.
The practical installation system, using metal hooks and elastic bands, guarantees complete adherence; everything is illustrated in a Video Tutorial, available via QR Code inside the Practical Package.
EUROPEAN APPROVALS AND CERTIFICATIONS
Equipped with the best Safety and Quality Certifications at European Level, to guarantee a Top of the Range product of its kind:
- TÜV: European Safety Certification
- Martindale 100.000 Friction Test: Each Fabric has successfully passed the Friction Test, for Maximum Durability
- OEKO-TEX Standard 100: Total Absence of Harmful Substances and Phthalates in the Fabrics Used, Safety in Production Processes and in the Factory
MULTIFUNCTION POCKET
The front seats have a practical compartment with 3 rear multifunction pockets; for seats that included the Standard Compartment, this comfortable Space will not be lost; for seats that did not include the standard compartment, it will be a useful added pocket
: CS.IC.FB.BK.GR.MZ.25
Out of Stock
Data Sheet
Type
In Suede Effect - PU Leather
Color
Black Suede - Gray PU Leather
Use on
Front and Rear Seats
Compatibility
Mazda MX-30 - ATTENTION Versions in Compatibility
N° Pieces
13
Certifications - Additional Info
Compatible with Airbags, TÜV - OEKO TEX STANDARD 100 Certifications
Dimension
59cm (LEN) - 50cm (WID) - 22Cm (H) - 3,6 Kg
Installation
Elastics + Metal Hooks + Zippers
Usage
Standard Car Seat Cover
Package Includes
1 Complete Set of Front + Rear Seat Covers + 5 Headrests
QUALITYSPCARS SRLS - Via Matera, 91 - Santeramo in Colle BA - PI 08118980724 - info@qspcars.it
COMPATIBILITY:
ATTENTION to the Version, NO SEATING with: Armrest and Integrated Belts, Non-Removable Headrest, Ergonomic Sporting
- Suitable for Mazda MX-30
(Eligible for Reclining Seats, Seats with Integrated AIRBAG, Rear seats with central armrest, Folding or Partially Folding Rear Seats)
ASSEMBLY:
" For a correct installation it is strongly recommended to always contact an expert in the sector "
" Some Stages may be slightly different, from Car to Car "
1) INSTALLATION OF FRONT SEATS
- Tilt the Backrest
- Place the appropriate cover on the Seat, aligning it as best as possible
- Bring the Elastics behind the Seat, passing them between the Back and the Seat
- Tighten and Fix the Side Elastics of the Seat between the Side Plastics of the Seat with the Help of a Flat Tip Screwdriver (or a similar tool)
- Make sure the Cover is Aligned Correctly with the Seat
- Tighten the elastics previously brought behind the seat and fix them under the seat, using the special metal hooks supplied
- Tension The Front Elastic Bands Of The Seat And Fix Them Under The Seat, Using The Special Metal Hooks Provided
- Repeat the operation on the Second Seat
2) INSTALLATION OF THE FRONT BACKREST
- ATTENTION: If the car has airbags, Make sure that the "Airbag" label of the seat and the seat cover are on the same side (to understand the exact cover of the driver and passenger seat)
- Remove the headrests
- Insert the Seat Cover on the Backrest and align it in the best way
- Bring the elastics of the front part behind the seat, passing them between the backrest and the seat
- Stretch the elastic bands from the back of the seat by pulling the end of the seat cover to which they are anchored, to give it a perfect adherence
- Fix the Elastics under the Seat, using the Special Metal Hooks Provided
- Make an X-shaped cut with scissors in the holes of the headrests and bring out the Plastic Arrangements, pushing the cut part under the Arrangements themselves
- Repeat the operation on the Second Backrest
3) HEADREST INSTALLATION
- Reinstall the Headrests in the Seat
- Slide the Hooded Cover over the Headrest and Line it up
4) REAR SEAT INSTALLATION
- Remove the Rear Seat Cushion (most cars are set up to Release the Rear Seat)
- Insert the seat cover on the seat and align it in the best way
- Tension and Fix the Elastics in Opposite Way to each other under the Seat, using the Special Metal Hooks Provided, trying to keep them as parallel as possible
- For a perfect look it is necessary to always align each end of the seat cover with the seat itself (e.g. corner to corner, top edge to top edge)
5) REAR BACKREST INSTALLATION
- Remove the headrests
- Insert the seat cover on the backrest, under the seat belts, and align it in the best way
- Lower the Backrest
- Bring the elastics of the front part behind the seat, passing them between the backrest and the seat
- Stretch and Fix the Elastics in Opposite Way Behind the Back, using the Special Metal Hooks Provided, trying to keep them as parallel as possible
- If the car is equipped with folding rear seats, lower the zip at the joint and partially fold the backrest
- By lowering the backrest, you will have access to the unfinished side: add the side covers by closing the zip on both unfinished sides
(Attention: The two Side Covers Are Attached to each other by an Elastic; if necessary, detach them with a cut)
- Tighten and Fix the Elastics of the Side Covers Behind the Back, using the Special Metal Hooks Provided
- For a perfect look it is necessary to always align each end of the seat cover with the seat itself (e.g. corner to corner, top edge to top edge)
(Although Simple and Intuitive, ASSEMBLY BY AN EXPERT IN THE SECTOR IS ALWAYS RECOMMENDED, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS RECOMMEND NOT DO IT YOURSELF)
Car SEAT COVERS for Mazda MX-30 Pu Leather and Suede Effect, FULL SET Front + Rear | TÜV Certified
COMPATIBILITY:
ATTENTION to the Version, NO SEATING with: Armrest and Integrated Belts, Non-Removable Headrest, Ergonomic Sporting
- Suitable for Mazda MX-30
(Eligible for Reclining Seats, Seats with Integrated AIRBAG, Rear seats with central armrest, Folding or Partially Folding Rear Seats)
ASSEMBLY:
" For a correct installation it is strongly recommended to always contact an expert in the sector "
" Some Stages may be slightly different, from Car to Car "
1) INSTALLATION OF FRONT SEATS
- Tilt the Backrest
- Place the appropriate cover on the Seat, aligning it as best as possible
- Bring the Elastics behind the Seat, passing them between the Back and the Seat
- Tighten and Fix the Side Elastics of the Seat between the Side Plastics of the Seat with the Help of a Flat Tip Screwdriver (or a similar tool)
- Make sure the Cover is Aligned Correctly with the Seat
- Tighten the elastics previously brought behind the seat and fix them under the seat, using the special metal hooks supplied
- Tension The Front Elastic Bands Of The Seat And Fix Them Under The Seat, Using The Special Metal Hooks Provided
- Repeat the operation on the Second Seat
2) INSTALLATION OF THE FRONT BACKREST
- ATTENTION: If the car has airbags, Make sure that the "Airbag" label of the seat and the seat cover are on the same side (to understand the exact cover of the driver and passenger seat)
- Remove the headrests
- Insert the Seat Cover on the Backrest and align it in the best way
- Bring the elastics of the front part behind the seat, passing them between the backrest and the seat
- Stretch the elastic bands from the back of the seat by pulling the end of the seat cover to which they are anchored, to give it a perfect adherence
- Fix the Elastics under the Seat, using the Special Metal Hooks Provided
- Make an X-shaped cut with scissors in the holes of the headrests and bring out the Plastic Arrangements, pushing the cut part under the Arrangements themselves
- Repeat the operation on the Second Backrest
3) HEADREST INSTALLATION
- Reinstall the Headrests in the Seat
- Slide the Hooded Cover over the Headrest and Line it up
4) REAR SEAT INSTALLATION
- Remove the Rear Seat Cushion (most cars are set up to Release the Rear Seat)
- Insert the seat cover on the seat and align it in the best way
- Tension and Fix the Elastics in Opposite Way to each other under the Seat, using the Special Metal Hooks Provided, trying to keep them as parallel as possible
- For a perfect look it is necessary to always align each end of the seat cover with the seat itself (e.g. corner to corner, top edge to top edge)
5) REAR BACKREST INSTALLATION
- Remove the headrests
- Insert the seat cover on the backrest, under the seat belts, and align it in the best way
- Lower the Backrest
- Bring the elastics of the front part behind the seat, passing them between the backrest and the seat
- Stretch and Fix the Elastics in Opposite Way Behind the Back, using the Special Metal Hooks Provided, trying to keep them as parallel as possible
- If the car is equipped with folding rear seats, lower the zip at the joint and partially fold the backrest
- By lowering the backrest, you will have access to the unfinished side: add the side covers by closing the zip on both unfinished sides
(Attention: The two Side Covers Are Attached to each other by an Elastic; if necessary, detach them with a cut)
- Tighten and Fix the Elastics of the Side Covers Behind the Back, using the Special Metal Hooks Provided
- For a perfect look it is necessary to always align each end of the seat cover with the seat itself (e.g. corner to corner, top edge to top edge)
(Although Simple and Intuitive, ASSEMBLY BY AN EXPERT IN THE SECTOR IS ALWAYS RECOMMENDED, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS RECOMMEND NOT DO IT YOURSELF)
Italiano
Inglese
Francese
Tedesco
Spagnolo
Fast Shipping
Products Warranty
Easy Returns
