X3 G01 (17-21)

Bmw X3 G01 17-21 | Tuning Accessories and Xenon LED Lights | QSPCARS

Active Filters

  • Function: Transport Accessories
Car Roof Rack Basket Tray FOR BMW X1 X2 X3 X4 X5 X6 X7 | Off...
COMPATIBILITY:

For BMW, with Roof Bars already Installed

- BMW X1
- BMW X2
- BMW X3
- BMW X4
- BMW X5
- BMW X6
- BMW X7


ASSEMBLY:

1) Join together the two parcels that make up the Luggage Rack
2) Screw them together using the appropriate screws
3) Secure the Luggage Carrier to the Roof Bars, using the 4x Brackets + Rubber Shims supplied




Although mouting is simple and intuitive, FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT.
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€329.99 Regular Price €340.20
Car Roof Rack Bars for Bmw X3 G01 ORIGINAL Nordrive Evos...
COMPATIBILITY:

- Bmw X3 G01 (from 2017), with Flush Railings (Low Railings)


INSTALLATION:

- For a Perfect Installation Mount the Bars at Approximately 70cm Distance Between Them.
- For Perfect Soundproofing Mount the Bars in the rearmost possible area of the Vehicle.
- For Perfect Positioning and Centering during Assembly, consult the graduated scale on the bottom of the Bars.

- Mount the roof bars as per the instructions
- Position them on the roof with the pointed part facing backwards
- Open the locks with the key provided
- Unscrew the pin that allows the clamp to open to the maximum allowed
- Position the bars on the low rails centering them on the roof
- Tighten the pin that closes the clamp to the maximum allowed (max 6Nm)
- Close the locks and plug the remaining empty channels with the gaskets provided


ATTENTION it is good practice to carry out a control pit stop after the first 100km, then after 250km and finally after 500km.


Although simple and intuitive, FOR OPTIMAL INSTALLATION, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the item mounted and subsequently detached.
We trust in your common sense.
€150.08 Regular Price €157.98
Car Roof Box, Travel Luggage Rack For Bmw Suv Black Carbon...
COMPATIBILITY:

- For BMW SUV with Roof Bars, Already Installed



ASSEMBLY:

- Place the roof box on the roof bars of your vehicle.
- At the base of the box, drill with a screwdriver the appropriate points, in correspondence with your bars.
- Insert the "U" brackets from the bottom towards the top, making them cross the box
- Screw with the pins supplied from inside the box, until it is correcty locked.


Although mouting is simple and intuitive, FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT.
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€141.14 Regular Price €156.82
Universal Car Roof BIKE RACK in Steel to be INSTALLED on Roof...
COMPATIBILITY:

- All Vehicles with Roof Bars


REQUIREMENTS:

- WHEEL WIDTH: from 25 mm to 35 mm
- BIKE FRAME DIAMETER: Ø from 28 mm to 40 mm
- ROOF BARS: Maximum 48 mm (Width) x 40 mm (Height)
- MAXIMUM LOAD WEIGHT: 15 Kg


INSTALLATION:

(Instructions Supplied)

- Secure the Frame Holder Pliers to each other, by means of the Special Spring + Bolt + Washer
- Attach the frame holder bracket to the front of the duct
- Screw the front part of the duct to the rear part
- Fix the Duct, complete with the Shelter Bracket, to the Car Roof Bars
- Secure the bike to the bike carrier by tightening the frame holder clamps and locking the wheels with the appropriate straps




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€39.98