Wheels Cover

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 16 Inches Iron Rims
- 16 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 14 Inches Iron Rims
- 14 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 13 Inches Iron Rims
- 13 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 14 Inches Iron Rims
- 14 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 15 Inches Iron Rims
- 15 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 13 Inches Iron Rims
- 13 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 14 Inches Iron Rims
- 14 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 14 Inches Iron Rims
- 14 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 13 Inches Iron Rims
- 13 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

COMPATIBILITY:

- 14 Inches Iron Rims
- 14 Inches Steel Rims

ATTENTION, NOT Compatible on Alloy Wheels.


ASSEMBLY:

- Make sure the size of the wheel cover is correct by checking the size of the tire and taking into account the number after the "R".
- Clean the inside of the rim
- The steel ring has a curvature for the tire valve: the curvature must face towards the wheel cover (not towards the wheel). Position the steel ring with the bend of the valve in correspondence with the appropriate point on the wheel cover.
- Lock the Steel Ring in the appropriate clips along the entire perimeter of the wheel cover.
- Snap the wheel cover onto the rim, applying pressure on the entire circumference of the wheel

- ATTENTION: If the wheel cover is not fixed and stable, it will be necessary to correct the circumference of the steel ring.
At the bending point of the valve ring, pull the ends from both sides and reposition the steel ring in the clips. Try Reinstalling the Wheel Cover. If so, repeat the operation further until the wheel cover is stable.

For a mathematical certainty of the impossibility of detachment it is possible to tighten the wheel cover with plastic clamps, to the detriment of aesthetics.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.