Brake Caliper Covers

COMPATIBILITY:

- With Maximum H 26 CM and 22 CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 26 CM and 22 CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 26 CM and 22 CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 22 CM and 17 CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 22 CM and 17 CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 22 CM and 17 CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 26CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 26CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 26CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 22CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 22CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 22CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 17CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 17CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

COMPATIBILITY:

- With Maximum H 17CM Brake Calipers

** ATTENTION: Strictly Measure Your Caliper before Proceeding to Purchase **
** ATTENTION: Adaptations or filings may be necessary for some vehicles **


ASSEMBLY:

1) Remove the Rim
2) Check that the measurements of the Cover are suitable for your Brake Caliper
Apply the necessary quantity of glue between the clamp and the cover; Use silicone glues or Body Mastics suitable for high temperatures
3 +) Or apply tightening screws by drilling the cover in non visible points
3 ++) Or Carry out internal welding with suitable equipment
4) Fix the Cover to the Caliper
5) Apply paper tape to hold them in place, wait for complete drying, 2 to 4 hours
6) Make sure there are no glue or silicone residues in the area of ??the Brake Pads and Calipers
7) Turn the brake disc manually, to make sure it works correctly, remove the adhesive tape and refit the rim




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.