Festoon - C5W

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 31 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 42mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 39 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 36 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 42-44 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 31 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 42mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 39 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 36 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- Vehicles with Halogen Festoon Bulb 42-44 mm (C5W / C10W / T11)
- Plug & Play installation


FOR A PERFECT INSTALLATION:

- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.