Filter By

Item

Item

Type

Type

Color

Color

Price

Price

  • €39.00 - €169.00

Left Banner

  • LeftBanner 1

Roof Racks Accessories

Car Additional Transport: Ski Rack, Bike Rack | QSPCARS

Active Filters

NORDRIVE MAGNETIC Universal Car SKI CARRIER in BLACK Aluminium...
COMPATIBILITY:

All Vehicles with Metal Roof:

SAFETY INDICES: Max weight 18Kg, Speed Max (Skis) 130 Km/h, (Snowboards) 100 Km/h


ASSEMBLY: (Illustrated Instructions Provided)

- Carefully clean the car roof
- Position the ski racks perpendicular to the car
- Place the ski racks at a distance of 70-75CM max.
- Unlock the Lock of the Ski Rack and Open it by Inserting the Skis or Snowboard
- Make sure the skis are with the tips facing the rear of the car and check that the ski mounts do not touch the roof or bars
- Repeat the Operation with the Second Ski Holder
- Lock the safety buckle by passing it through the front doors of the car (NO Rear) so that the buckle is inside the vehicle.



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
€158.84 Regular Price €168.98
Universal Car SKI RACK for Roof Bars NORDRIVE 6 PAIRS of Skis,...
COMPATIBILITY:

All Vehicles with Roof Bars, With one of the following characteristics:

- ROOF BARS with Central "T" Channel (the one Covered with Black Rubber) | Sliding Fixing
- ROOF BARS with a Maximum Section of 60 mm (Length) x H 57 mm (Height) | Screw Fixing with Supplied Adapters


SAFETY INDICES: Max weight 36Kg, Speed Max (Skis) 130 Km/h, (Snowboards) 100 Km/h


ASSEMBLY:

(Illustrated Instructions Provided)

A) Bars Prearranged for "T" Junction | Sliding Fixing

- Remove the Side Caps and the Rubber Strip from the Central Channel of the Roof Bars
- Insert the two Unified "T" fittings into the duct, at a distance of 475mm from each other
- Reposition the Rubber Strip of the Bar in the Channel, if desired, after appropriate Reshaping, between the remaining spaces
- Close the Side Caps of the Roof Bar
- Unlock the lock on the ski rack and open it
- Position the Ski Rack on the "T" Fittings which now come out of the Roof Bar
- Fix it from the inside, tightening it with the special bolts
- Make sure that the skis are with the tips facing the rear of the car and check that the bindings of the skis do not touch the roof or the bars
- Repeat the operation with the Second Ski Carrier


B) Bars With Mounting By Brackets | Screw Fixing with Supplied Adapters

- Place a "T" Fitting for each Bracket, from the Inside to the Upper Part of the Bracket
- Fix 2 Brackets on Each Bar, and Tighten them through the two predispositions, using the Long Bolts of the most appropriate Size, based on the Height of the Bar Itself
- Unlock the lock on the ski rack and open it
- Position the Ski Rack on the "T" Fittings, present in each Bracket, and Fix it from the Inside, using the Appropriate Bolts
- Make sure that the skis are with the tips facing the rear of the car and check that the bindings of the skis do not touch the roof or the bars
- Repeat the operation with the Second Ski Carrier




Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
€119.95 Regular Price €128.98
NORDRIVE Universal Car SKI CARRIER in BLACK Aluminium | On...
COMPATIBILITY:

All Vehicles with Roof Bars, With one of the following characteristics:

- ROOF BARS with Central "T" Channel (the one Covered with Black Rubber) | Sliding Fixing
- ROOF BARS with a Maximum Section of 60 mm (Length) x H 57 mm (Height) | Screw Fixing with Supplied Adapters


SAFETY INDICES: Max weight 24Kg, Speed Max (Skis) 130 Km/h, (Snowboards) 100 Km/h


ASSEMBLY:

(Illustrated Instructions Provided)

A) Bars Prearranged for "T" Junction | Sliding Fixing

- Remove the Side Caps and the Rubber Strip from the Central Channel of the Roof Bars
- Insert the two Unified "T" fittings into the duct, at a distance of 475mm from each other
- Reposition the Rubber Strip of the Bar in the Channel, if desired, after appropriate Reshaping, between the remaining spaces
- Close the Side Caps of the Roof Bar
- Unlock the lock on the ski rack and open it
- Position the Ski Rack on the "T" Fittings which now come out of the Roof Bar
- Fix it from the inside, tightening it with the special bolts
- Make sure that the skis are with the tips facing the rear of the car and check that the bindings of the skis do not touch the roof or the bars
- Repeat the operation with the Second Ski Carrier


B) Bars With Mounting By Brackets | Screw Fixing with Supplied Adapters

- Place a "T" Fitting for each Bracket, from the Inside to the Upper Part of the Bracket
- Fix 2 Brackets on Each Bar, and Tighten them through the two predispositions, using the Long Bolts of the most appropriate Size, based on the Height of the Bar Itself
- Unlock the lock on the ski rack and open it
- Position the Ski Rack on the "T" Fittings, present in each Bracket, and Fix it from the Inside, using the Appropriate Bolts
- Make sure that the skis are with the tips facing the rear of the car and check that the bindings of the skis do not touch the roof or the bars
- Repeat the operation with the Second Ski Carrier




Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
€118.98
NORDRIVE Universal Car SKI CARRIER in Aluminium | On Roof with...
COMPATIBILITY:

All Vehicles with Roof Bars, With one of the following characteristics:

- ROOF BARS with Central "T" Channel (the one Covered with Black Rubber) | Sliding Fixing
- ROOF BARS with a Maximum Section of 60 mm (Length) x H 57 mm (Height) | Screw Fixing with Supplied Adapters


SAFETY INDICES: Max weight 24Kg, Speed Max (Skis) 130 Km/h, (Snowboards) 100 Km/h


ASSEMBLY:

(Illustrated Instructions Provided)

A) Bars Prearranged for "T" Junction | Sliding Fixing

- Remove the Side Caps and the Rubber Strip from the Central Channel of the Roof Bars
- Insert the two Unified "T" fittings into the duct, at a distance of 475mm from each other
- Reposition the Rubber Strip of the Bar in the Channel, if desired, after appropriate Reshaping, between the remaining spaces
- Close the Side Caps of the Roof Bar
- Unlock the lock on the ski rack and open it
- Position the Ski Rack on the "T" Fittings which now come out of the Roof Bar
- Fix it from the inside, tightening it with the special bolts
- Make sure that the skis are with the tips facing the rear of the car and check that the bindings of the skis do not touch the roof or the bars
- Repeat the operation with the Second Ski Carrier


B) Bars With Mounting By Brackets | Screw Fixing with Supplied Adapters

- Place a "T" Fitting for each Bracket, from the Inside to the Upper Part of the Bracket
- Fix 2 Brackets on Each Bar, and Tighten them through the two predispositions, using the Long Bolts of the most appropriate Size, based on the Height of the Bar Itself
- Unlock the lock on the ski rack and open it
- Position the Ski Rack on the "T" Fittings, present in each Bracket, and Fix it from the Inside, using the Appropriate Bolts
- Make sure that the skis are with the tips facing the rear of the car and check that the bindings of the skis do not touch the roof or the bars
- Repeat the operation with the Second Ski Carrier




Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
€108.98
Universal Car Roof BIKE RACK in Steel to be INSTALLED on Roof...
COMPATIBILITY:

- All Vehicles with Roof Bars


REQUIREMENTS:

- WHEEL WIDTH: from 25 mm to 35 mm
- BIKE FRAME DIAMETER: Ø from 28 mm to 40 mm
- ROOF BARS: Maximum 48 mm (Width) x 40 mm (Height)
- MAXIMUM LOAD WEIGHT: 15 Kg


INSTALLATION:

(Instructions Supplied)

- Secure the Frame Holder Pliers to each other, by means of the Special Spring + Bolt + Washer
- Attach the frame holder bracket to the front of the duct
- Screw the front part of the duct to the rear part
- Fix the Duct, complete with the Shelter Bracket, to the Car Roof Bars
- Secure the bike to the bike carrier by tightening the frame holder clamps and locking the wheels with the appropriate straps




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€60.43 Regular Price €64.98
Universal Car Roof BIKE RACK in Steel to be INSTALLED on Roof...
COMPATIBILITY:

- All Vehicles with Roof Bars


REQUIREMENTS:

- WHEEL WIDTH: from 25 mm to 35 mm
- BIKE FRAME DIAMETER: Ø from 28 mm to 40 mm
- ROOF BARS: Maximum 48 mm (Width) x 40 mm (Height)
- MAXIMUM LOAD WEIGHT: 15 Kg


INSTALLATION:

(Instructions Supplied)

- Secure the Frame Holder Pliers to each other, by means of the Special Spring + Bolt + Washer
- Attach the frame holder bracket to the front of the duct
- Screw the front part of the duct to the rear part
- Fix the Duct, complete with the Shelter Bracket, to the Car Roof Bars
- Secure the bike to the bike carrier by tightening the frame holder clamps and locking the wheels with the appropriate straps




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€39.98