Left Banner

  • LeftBanner 1

Automobile Tools

Useful Car Tools for Enthusiasts | QSPCARS

Active Filters

PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner GERMANY Workshop | 2.2T Max
  • -6%
  • New
Add to Wishlist
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner...
COMPATIBILITY:

- Vehicles Weighing up to 3 tons
- Minimum H 85mm - Maximum H 380mm


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Use the lever, starting the lift, until the bottom of the car is reached with the rubber bearing, until it comes into contact with the vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Strokes
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€126.88 Regular Price €134.98
CROSS KEY for Car Wheels Professional in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
  • New
Add to Wishlist
CROSS KEY for Car Wheels Professional in Hardened STEEL |...
COMPATIBILITY:

- Almost All Vehicle Wheels
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96
6 Professional Removal Levers | Car Door, Panels, Trim Removal Tools
  • -6%
  • New
Add to Wishlist
6 Professional Removal Levers | Car Door, Panels, Trim Removal...
COMPATIBILITY:

- UNIVERSAL: Suitable for all cars


USE:

- Insert the tip of the lever in the slot of the part you want to disassemble
- Exert pressure on the lever until the interested part is released


(Even if Simple and Intuitive, WE ALWAYS RECOMMEND USE BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS RECOMMEND DO IT YOURSELF)
Add to Wishlist
€15.96 Regular Price €16.98