Jumpy II (07-16)

Citroen Jumpy 2 | Tuning Accessories and LED Lights | QSPCARS

Active Filters

  • Color: 6.500K Ice White Light
  • Color: Anodized Red
  • Color: Intense Black
  • Color: Metallic Silver
H4 Full LED Kit for CITROEN JUMPY 2 Low + High Beam | 6500K 8000LM CANbus Error FREE
  • -4%
Add to Wishlist
H4 Full LED Kit for CITROEN JUMPY 2 Low + High Beam | 6500K...
COMPATIBILITY:

- For CITROEN JUMPY 2 (2007-2016), Low + High Beam



FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.
Add to Wishlist
€66.22 Regular Price €68.98
H7 LED Kit for Citroen Jumpy 2 Low Beam CANbus Bulbs | 6500K Cool White 8000LM
  • -4%
Add to Wishlist
H7 LED Kit for Citroen Jumpy 2 Low Beam CANbus Bulbs | 6500K...
COMPATIBILITY:

- For Lowbeam CITROEN JUMPY 2 (2007-2016)



FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:

All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.
Add to Wishlist
€61.88 Regular Price €64.46
LED License Plate Lights CANbus for Citroen JUMPY 2 Van | 6500K Ice White Light, Plug & Play
  • -2%
  • Out of Stock
Add to Wishlist
LED License Plate Lights CANbus for Citroen JUMPY 2 Van |...
COMPATIBILITY:

CITROEN:

- Jumpy 2 Van (2007-2016)

** ATTENTION: Only for Versions with 2 Rear Doors **


INSTRUCTION:

- Remove the current led plates, using a screwdriver if necessary, inserting the tip in the side part of the plate and apply pressure towards the outside: the plate will come out./ If Screws present Remove them by unscrewing them to release the plate

- Disconnect the cable and disconnect definitely the plate.

- Connect the new LED PLATE to the cable and replace it inside the housing. Repeat the same operation with the second plate.


FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMENDS THE INSTALLATION BY AN EXPERT


We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail. WE WILL NOT ACCEPT RETURNS FOR INCOMPATIBILITY or WRONG PURCHASES
Add to Wishlist
€23.41 Regular Price €23.89
License Plate Lights Full LED for CITROEN Jumpy 2 18 Leds 6500K White Ice | Canbus Plug & Play
  • -3%
Add to Wishlist
License Plate Lights Full LED for CITROEN Jumpy 2 18 Leds...
COMPATIBILITY:

CITROEN:

- Citroen Jumpy II (2007-2016)



- Correspondence Also with the Original Code: 6340A5, 6340G9, 6340.A5, 6340.G9, 0009565678580, 0009688349480, 26510-AU300, 26511AU310, 2E0943021A, 2E0943021B, 6398200156, 6398200256, 9069062100, 9635678580, 9688349480


ASSEMBLY INSTRUCTIONS:

- Remove the current plates, using a screwdriver if necessary, inserting the tip into the lateral part of the plate and pressing towards the outside: the plate will release and come out.

- Disconnect the cable and finally detach the plate.

- Connect the new LED PLATE to the cable and reposition it inside the housing. Repeat the same operation with the second plate.




FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMENDS THE INSTALLATION BY AN EXPERT


We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail. WE WILL NOT ACCEPT RETURNS FOR INCOMPATIBILITY or WRONG PURCHASES
Add to Wishlist
€22.20 Regular Price €22.89
Front License Plate Holder for Citroen, Side Relocator Bracket, in Anodized Red Steel
  • -1%
Add to Wishlist
Front License Plate Holder for Citroen, Side Relocator...
COMPATIBILITY:

- For CITROEN Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25
Car TYRE SHINE Professional Applicable on Citroen Wheels | Intense Black CONCENTRATE Car Detailing
  • -5%
Add to Wishlist
Car TYRE SHINE Professional Applicable on Citroen Wheels |...
COMPATIBILITY:

- On Tyres External Edging of your Citroen


APPLICATION: 1 With a Sponge, Cloth or Brush - 2 With a Spray Bottle
'' IT IS POSSIBLE TO APPLY IT WITHOUT DILUTING IT or with a little water, having a MORE INTENSE EFFECT with a more Strong colour"

1
- Thoroughly clean the tires before application
- Dilute 50Ml of Concentrate in 200Ml of Water in a Plastic Bucket
- Apply the product with a sponge, cloth or brush
- Wait for Drying

2
- Thoroughly clean the tires before application
- Dilute 1 Part Concentrate in 2-4 Parts Water and Insert it into a Spray Applicator
- Apply the product with a spray bottle
- Wait for Drying




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.
Add to Wishlist
€18.03 Regular Price €18.98
Professional CROSS KEY Suitable for for CITROEN Wheels | in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
Add to Wishlist
Professional CROSS KEY Suitable for for CITROEN Wheels | in...
COMPATIBILITY:

- Wheels Vehicles, including Citroen
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96