Garage Set-Ups

Active Filters

Red Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel Saver | Original KUBERTH S Supercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€365.66 Regular Price €389.00
Black Carbon Tire Cradles Flat Stop Protector, Anti-Ovalizing | Original KUBERTH X Hypercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Carbon Tire Cradles Flat Stop Protector, Anti-Ovalizing...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€328.06 Regular Price €349.00
Black Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel Saver | Original KUBERTH S Supercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€309.26 Regular Price €329.00
Red Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver for CLASSIC CARS | Original Kuberth V MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2.200 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€252.86 Regular Price €269.00
Black Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver for CLASSIC CARS | Original Kuberth V MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Tire Cradles Flat Stop Protector Anti-Ovalizing Tire...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2.200 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€224.66 Regular Price €239.00
Car BOOSTER Portable Emergency JUMP STARTER + POWER BANK for Planes 37.000mWh
  • -5%
  • New
  • Out of Stock
Add to Wishlist
Car BOOSTER Portable Emergency JUMP STARTER + POWER BANK for...
COMPATIBILITY

Jump Starter Mode (Emergency Start-up):

- Cars, Motorcycles, Pic ups, Suvs, Commercial Vehicles and Boats
- Petrol, Diesel, Hybrid, Start and Stop Engines
- Petrol Engines up to 8.000cc Displacement, Diesel Engines up to 7.000cc Displacement

Power Bank Mode (Portable Charger):

- Any 12V electrical or electronic accessory or appliance, including Apple devices


JUMP STARTER USE:

- Access the battery compartment of the vehicle, motor vehicle or watercraft
- Connect the Wiring Harness that has the two Pliers (Red and Black) at one end, and the Blue Plug at the other, to the Jump Starter
- Switch on the Jump Stater By pressing the only available button, to check the charge status
- Connect the Red Pliers to the Positive Pole, the Black Pliers to the Negative Pole (NO FEAR, if you make a mistake there will be NO sparks)
- After the connection, press the only button on the transformer of the Harness, if connected correctly a green light will turn on; if it is red, invert the polarity or check the clamp connection and press the button again
- A green light proceed with starting the vehicle

POWERBANK USE:

- Connect the cable needed to power the device you want to charge to a USB or USB-C socket and press the power button
- Wireless recharge, place a device designed for this recharge on the lightning bolt design on the Power Bank and press the power button
- The recharge or flow of current through the cigarette lighter takes place by connecting the DC plug, which has the cigarette lighter input at the end; Therefore insert the cigarette lighter socket and press the ignition button




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article. as we describe each individual specification in detail. WE WILL NOT ACCEPT RETURNS FOR INCOMPATIBILITY ERRONEY PURCHASES
Add to Wishlist
€150.10 Regular Price €158.00
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner GERMANY Workshop | 2.2T Max
  • -6%
  • New
Add to Wishlist
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner...
COMPATIBILITY:

- Vehicles Weighing up to 3 tons
- Minimum H 85mm - Maximum H 380mm


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Use the lever, starting the lift, until the bottom of the car is reached with the rubber bearing, until it comes into contact with the vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Strokes
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€126.88 Regular Price €134.98
10 Tiles 50x50 PVC Interlocking Garage Flooring, Black Polyvinyl High Resistance, MADE IN ITALY
  • -3%
  • New
Add to Wishlist
10 Tiles 50x50 PVC Interlocking Garage Flooring, Black...
COMPATIBILITY:

- JEEP WRANGLER JK 2007>



INSTRUCTIONS:

- Just Replace the current one as a perfect replacement: 100% TESTED COMPATIBILITY
- (If You Want It) Prepares for Painting Subject to suitable treatment for ABS.



FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€67.89 Regular Price €69.99
Mini Portable Car COMPRESSOR PROFESSIONAL Heyner GERMANY | POWERFUL Pressure Max 10bar
  • -5%
  • New
Add to Wishlist
Mini Portable Car COMPRESSOR PROFESSIONAL Heyner GERMANY |...
COMPATIBILITY:

- Vehicles, Motorcycles, SUVs, Bikes, Trucks, Camping, Inflatable Devices (Inflatable Boats, balls, etc...)
- 12V Power Supply
- Pressure up to 10 bar / 150 psi
- Standard and Non-Standard Valves (4 Adapters Supplied)


USE:

(Illustrated Instructions Supplied)

- Position the Vehicle on an Absolutely Flat Surface
- Engage the parking brake
- Start the Vehicle Engine
- Connect the Cigarette Lighter Socket to the Vehicle (12V ONLY)
- Connect the Inflation Hose to the Valve of the Wheel or Device you want to inflate
- Press the "R" button to set the desired pressure by increasing or decreasing the value with the "+" or "-" button
- Wait 3 Seconds from Preset Setting
- Start the compressor, the compressor will stop at the preset pressure which will remain in memory
- For the next inflations it will only be necessary to start the compressor
- In dark situations, press the torch button to turn on the built-in LED torch



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€56.98 Regular Price €59.98
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 2.0 Ton | TÜV GS Approved
  • -12%
  • New
  • Out of Stock
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- SUVs and Large Sedans, of Segment E (Max Weight 2.8 Tons)
- Ex. Audi Q7, Range Rover Sport, Bmw 7 Series, Porsche Cayenne, VW Touareg, Etc...
- Minimum H 98mm - Maximum H 442m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€51.90 Regular Price €58.98
10pcs Sliding Terminals for PVC Floor | Interlocking profiles MALE Fitting
  • -6%
  • New
  • Out of Stock
Add to Wishlist
10pcs Sliding Terminals for PVC Floor | Interlocking profiles...
COMPATIBILITY:

- With Polyvinyl Tiles 50cm x 50cm, Bubble Design

* * * LOOK FOR IT IN OUR STORE! * * *


ASSEMBLY:

- Simply Fit the "Male" Coupling Slide to the "Female" Coupling Tile, Making the Hooks Match
- Use a Plastic Hammer




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€51.69 Regular Price €54.99
10pcs Sliding Terminals for PVC Floor | Interlocking profile FEMALE Fitting
  • -6%
  • New
Add to Wishlist
10pcs Sliding Terminals for PVC Floor | Interlocking profile...
COMPATIBILITY:

- With Polyvinyl Tiles 50cm x 50cm, Bubble Design

* * * LOOK FOR IT IN OUR STORE! * * *


ASSEMBLY:

- Simply Fit the "Female" Coupling Slide to the "Male" Coupling Tile, Making the Hooks Match
- Use a Plastic Hammer




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€51.69 Regular Price €54.99
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design Route 66 | 320 Lt
  • -6%
  • New
  • Out of Stock
Add to Wishlist
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Black Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Black Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€46.98 Regular Price €49.98
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With Fiat 500 Rossa in Rome | 320 Lt
  • -6%
  • New
Add to Wishlist
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Red Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Red Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€46.98 Regular Price €49.98
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 1.5 Ton | TÜV GS Approved
  • -10%
  • New
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- Sedans and Medium SUVs, of Segment D (Max Weight 2.1 Tons)
- Ex. VW Tiguan, Mercedes C-Class, Nissan Qashqai, Bmw Serie 3, Audi A4, Etc...
- Minimum H 105mm - Maximum H 380m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€44.81 Regular Price €49.79
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 1.0 Ton | TÜV GS Approved
  • -10%
  • New
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- Compact Vehicles, of Segment C (Max Weight 1.6 Tons)
- Ex. VW Golf, Opel Astra, Ford Focus, Seat Leon, Etc...
- Minimum H 90mm - Maximum H 348m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€39.58 Regular Price €43.98
Professional Booster Cables for Cars, Bikes, Trucks | 400 Ampere 200 Cm 12-24v
  • -2%
  • New
Add to Wishlist
Professional Booster Cables for Cars, Bikes, Trucks | 400...
COMPATIBILITY:

- 12-24V Batteries, Max 400A


APPLICATION:

- Apply the clamp of the red cable on the positive pole of the battery (+)
- Apply the clamp of the black cable on the negative pole of the battery (-)


Although Simple and Intuitive We always recommend the use of our products by a professional in the sector, as we will not take responsibility for incorrect applications - personal damage or damage to third parties.
Add to Wishlist
€32.57 Regular Price €33.23
CROSS KEY for Car Wheels Professional in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
  • New
Add to Wishlist
CROSS KEY for Car Wheels Professional in Hardened STEEL |...
COMPATIBILITY:

- Almost All Vehicle Wheels
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96