LED Kit HB2

COMPATIBILITY:

- All Cars with HALOGEN H4 BULBS


FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULB

- CHECK FIRST: Connect only the LED socket (PLUG AND PLAY) to the system and switch it on; if there are no problems, proceed with the assembly

- BLOCK ONLY THE LED RING: Remove the ring from the LED by rotating it until it comes off; Lock it on the Headlight bulb holder.

- CONNECT THE SOCKET AND LOCK THE BULB: Insert the LED bulb into the ring nut (previously fixed on the headlight bulb holder) making it cross, Lock it with rotational movements.


NON-STANDARD CASES

- DEEPER DUST CAPS:
Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:
All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.

We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.

We trust in your common sense.

COMPATIBILITY:

- All Cars and Bikes with HALOGEN HB2 BULBS


FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULB

- CHECK FIRST: Connect only the LED socket (PLUG AND PLAY) to the system and switch it on; if there are no problems, proceed with the assembly

- BLOCK ONLY THE LED RING: Remove the ring from the LED by rotating it until it comes off; Lock it on the Headlight bulb holder.

- CONNECT THE SOCKET AND LOCK THE BULB: Insert the LED bulb into the ring nut (previously fixed on the headlight bulb holder) making it cross, Lock it with rotational movements.


NON-STANDARD CASES

- DEEPER DUST CAPS:
Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:
All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.

We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.

We trust in your common sense.