Cherokee KK (08-12)

Jeep Cherokee KK | Tuning Accessories and LED Lights | QSPCARS

Active Filters

  • Color: Anodized Red
  • Color: Anodized Steel
  • Color: Metallic Grey
  • Color: Satin Aluminium
Car Roof Rack Basket Tray for Jeep Cherokee KK KJ | Travel Luggage CARRIER in Silver Aluminum
  • -3%
Add to Wishlist
Car Roof Rack Basket Tray for Jeep Cherokee KK KJ | Travel...
COMPATIBILITY:

For JEEP Cars, with Open Longitudinal HANDRAILS (See IMAGE Nr. 2):

- Cherokee KJ (2001-2008)
- Cherokee KK (2008-2012)


ASSEMBLY:

The Roof Rack Comes DISASSEMBLED (Instructions Inside the Package):

1) Join the different tubulars by means of special screws - bolts supplied
2) Secure the Roof Rack to the OPEN Longitudinal Handrails of the Car, using the 4x Screw-on Brackets




Although mouting is simple and intuitive, FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT.
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€190.60 Regular Price €196.49
Car BOOSTER Emergency JUMP STARTER Portable in your Jeep + POWER BANK for Planes
  • -5%
  • Out of Stock
Add to Wishlist
Car BOOSTER Emergency JUMP STARTER Portable in your Jeep +...
COMPATIBILITY

Jump Starter Mode (Emergency Start-up):

- Cars (including Jeep), Motorcycles, Pic ups, Suvs, Commercial Vehicles and Boats
- Petrol, Diesel, Hybrid, Start and Stop Engines
- Petrol Engines up to 8.000cc Displacement, Diesel Engines up to 7.000cc Displacement

Power Bank Mode (Portable Charger):

- Any 12V electrical or electronic accessory or appliance, including Apple devices


JUMP STARTER USE:

- Access the Battery Compartment of your Jeep (or of the Motorcycle or Watercraft)
- Connect the Wiring Harness that has the two Pliers (Red and Black) at one end, and the Blue Plug at the other, to the Jump Starter
- Switch on the Jump Stater By pressing the only available button, to check the charge status
- Connect the Red Pliers to the Positive Pole, the Black Pliers to the Negative Pole (NO FEAR, if you make a mistake there will be NO sparks)
- After the connection, press the only button on the transformer of the Harness, if connected correctly a green light will turn on; if it is red, invert the polarity or check the clamp connection and press the button again
- A green light proceed with starting the vehicle

POWERBANK USE:

- Connect the cable needed to power the device you want to charge to a USB or USB-C socket and press the power button
- Wireless recharge, place a device designed for this recharge on the lightning bolt design on the Power Bank and press the power button
- The recharge or flow of current through the cigarette lighter takes place by connecting the DC plug, which has the cigarette lighter input at the end; Therefore insert the cigarette lighter socket and press the ignition button




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article. as we describe each individual specification in detail. WE WILL NOT ACCEPT RETURNS FOR INCOMPATIBILITY ERRONEY PURCHASES
Add to Wishlist
€150.10 Regular Price €158.00
Roof Rack Bars For Jeep Cherokee KK-KL in Aluminum GOODYEAR | Load 90KG Double Anti-Theft Locking
  • -4%
  • Out of Stock
Add to Wishlist
Roof Rack Bars For Jeep Cherokee KK-KL in Aluminum GOODYEAR |...
COMPATIBILITY:

- For CHEROKEE KK (2008-2013), CHEROKEE KL (dal 2013), WITH HIGH HANDRAILS (SEE PHOTO)


HANDRAILS NECESSARILY:

- Maximum distance between one and the other 125Cm


ASSEMBLY:

- Insert the lock key to remove the side covers and access the screws below
- Take a screwdriver and unscrew the screws, to make the feet open as much as possible
- Position the Roof Bars by hooking them to the Longitudinal Handrails
- Center the bars on the rails
- Tighten the screws of each foot until it locks correctly WITHOUT FORCE EXCESSIVELY
- Close the side covers by locking them with the key lock




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€76.69 Regular Price €79.89
Car Roof Rack Bars in Aluminum for Jeep Cherokee KK Renegade version GOODYEAR Load 90KG with Double Anti-Theft Locking System
  • -4%
  • Out of Stock
Add to Wishlist
Car Roof Rack Bars in Aluminum for Jeep Cherokee KK Renegade...
COMPATIBILITY:

For JEEP CHEROKEE KK RENEGADE version (08-12)

HANDRAILS NECESSARILY:

- Maximum distance between one and the other 110CM


ASSEMBLY:

- Insert the lock key to remove the side covers and access the screws below
- Take a screwdriver and unscrew the screws, to make the feet open as much as possible
- Position the Roof Bars by hooking them to the Longitudinal Handrails
- Center the bars on the rails
- Tighten the screws of each foot until it locks correctly WITHOUT FORCE EXCESSIVELY
- Close the side covers by locking them with the key lock




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€76.69 Regular Price €79.89
Front LICENSE PLATE Holder for Jeep Bracket SIDE RELOCATOR In Anodized STEEL tuning
  • -1%
Add to Wishlist
Front LICENSE PLATE Holder for Jeep Bracket SIDE RELOCATOR In...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25
Front License Plate Holder for Jeep, Side Relocator Bracket, in Anodized Red Steel
  • -1%
Add to Wishlist
Front License Plate Holder for Jeep, Side Relocator Bracket,...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25