Cherokee KL (13-19)

Jeep Cherokee KL 13-19 | Tuning Accessories and LED Lights | QSPCARS

Active Filters

  • Color: Anodized Red
  • Color: Anodized Steel
  • Color: Matt Black
  • Color: Metallic Silver

There Are 4 Products.

Sort by:
Sales, highest to lowest Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low Reference, A to Z Reference, Z to A
ERROR FREE Canceller Decoder LED lights JEEP CHEROKEE KL | Resistors 9006 kit led Bulbs
  • -5%
Add to Wishlist
ERROR FREE Canceller Decoder LED lights JEEP CHEROKEE KL |...
COMPATIBILITY:

FULL LED 9006 KIT

- Jeep Cherokee KL (2013-2019)



FOR AN OPTIMAL MOUNTING, WE RECOMMEND:

- CHECK: Connect only the Sockets (PLUG AND PLAY); if there are no problems, proceed with the assembly

- CONNECT MALE SOCKET: Connect the male socket to the CAR

- CONNECT FEMALE SOCKET: Connect the Full Led Kit to the Female Socket

- CHECK: Start the vehicle to check if there are no problems, only then proceed to lock the LED bulb.

- INSTALLATION: Repeat the operation on the second headlight

It is PREFERABLE to keep the resistors out of the headlight, since the lower the overheating is, the longer the DURATION OF YOUR LED KIT WILL BE.



NON-STANDARD CASES

- DEEPER DUST CAPS:
Mounting a TRANSFORMATION kit, and not simple spare bulbs, it has bigger dimensions. If the installation of the kit does not allow the closure of the lighthouse, visit our store for the DEEPER DUST CAPS.





We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.

We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.

We trust in your common sense.
Add to Wishlist
€32.28 Regular Price €33.98
Front LICENSE PLATE Holder for Jeep Bracket SIDE RELOCATOR In Anodized STEEL tuning
  • -1%
Add to Wishlist
Front LICENSE PLATE Holder for Jeep Bracket SIDE RELOCATOR In...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25
Front License Plate Holder for Jeep, Side Relocator Bracket, in Anodized Red Steel
  • -1%
Add to Wishlist
Front License Plate Holder for Jeep, Side Relocator Bracket,...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25
Professional CROSS KEY Suitable for for JEEP Wheels | in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
Add to Wishlist
Professional CROSS KEY Suitable for for JEEP Wheels | in...
COMPATIBILITY:

- Wheels Vehicles, including Jeep
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96