Cherokee KL (13-19)

Jeep Cherokee KL 13-19 | Tuning Accessories and LED Lights | QSPCARS

Active Filters

  • Color: Anodized Red
  • Color: Chromed
  • Color: Matt Black
ERROR FREE Canceller Decoder LED lights JEEP CHEROKEE KL |...
COMPATIBILITY:

FULL LED 9006 KIT

- Jeep Cherokee KL (2013-2019)



FOR AN OPTIMAL MOUNTING, WE RECOMMEND:

- CHECK: Connect only the Sockets (PLUG AND PLAY); if there are no problems, proceed with the assembly

- CONNECT MALE SOCKET: Connect the male socket to the CAR

- CONNECT FEMALE SOCKET: Connect the Full Led Kit to the Female Socket

- CHECK: Start the vehicle to check if there are no problems, only then proceed to lock the LED bulb.

- INSTALLATION: Repeat the operation on the second headlight

It is PREFERABLE to keep the resistors out of the headlight, since the lower the overheating is, the longer the DURATION OF YOUR LED KIT WILL BE.



NON-STANDARD CASES

- DEEPER DUST CAPS:
Mounting a TRANSFORMATION kit, and not simple spare bulbs, it has bigger dimensions. If the installation of the kit does not allow the closure of the lighthouse, visit our store for the DEEPER DUST CAPS.





We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.

We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.

We trust in your common sense.
€32.28 Regular Price €33.98
Rear Car Chrome License Plate Support Kit for Jeep, in...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an Indentation on the bumper where it will be possible to fix the bracket (LOOK AT THE PHOTO).



ASSEMBLY:

- Put the plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the Screws

- Remove the plate and apply it on the new plate holder

- Apply the chromed frame and Fix it with the 4 screws supplied




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€19.78
Front License Plate Holder for Jeep, Side Relocator Bracket,...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€19.06 Regular Price €19.25