Cherokee KL (13-19)

Jeep Cherokee KL 13-19 | Tuning Accessories and LED Lights | QSPCARS

Active Filters

  • Color: Anodized Red
  • Color: Metallic Red
  • Color: Metallic Silver
  • Color: Satin Aluminium

There Are 4 Products.

Sort by:
Sales, highest to lowest Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low Reference, A to Z Reference, Z to A
Roof Rack Bars For Jeep Cherokee KK-KL in Aluminum GOODYEAR | Load 90KG Double Anti-Theft Locking
  • -4%
  • Out of Stock
Add to Wishlist
Roof Rack Bars For Jeep Cherokee KK-KL in Aluminum GOODYEAR |...
COMPATIBILITY:

- For CHEROKEE KK (2008-2013), CHEROKEE KL (dal 2013), WITH HIGH HANDRAILS (SEE PHOTO)


HANDRAILS NECESSARILY:

- Maximum distance between one and the other 125Cm


ASSEMBLY:

- Insert the lock key to remove the side covers and access the screws below
- Take a screwdriver and unscrew the screws, to make the feet open as much as possible
- Position the Roof Bars by hooking them to the Longitudinal Handrails
- Center the bars on the rails
- Tighten the screws of each foot until it locks correctly WITHOUT FORCE EXCESSIVELY
- Close the side covers by locking them with the key lock




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€76.69 Regular Price €79.89
Front License Plate Holder for Jeep, Side Relocator Bracket, in Anodized Red Steel
  • -1%
Add to Wishlist
Front License Plate Holder for Jeep, Side Relocator Bracket,...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25
Professional CROSS KEY Suitable for for JEEP Wheels | in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
Add to Wishlist
Professional CROSS KEY Suitable for for JEEP Wheels | in...
COMPATIBILITY:

- Wheels Vehicles, including Jeep
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96