Grand Cherokee WK-WH (05-10)

Grand Cherokee WK-WH | Accessories and LED Lights | QSPCARS

Active Filters

  • Color: 6.500K Ice White Light
  • Color: Anodized Red
  • Color: Anodized Steel
  • Color: Satin Aluminium
Car Roof Rack Basket Tray for Jeep Grand Cherokee ZJ WJ WK WH | Travel Luggage CARRIER in Silver Aluminum
  • -3%
Add to Wishlist
Car Roof Rack Basket Tray for Jeep Grand...
COMPATIBILITY:

For JEEP Cars, with Open Longitudinal HANDRAILS (See IMAGE Nr. 2):

- Grand Cherokee ZJ-ZG (1993-1998)
- Grand Cherokee WJ (1999-2004)
- Grand Cherokee WK-WH (2005-2010)



ASSEMBLY:

The Roof Rack Comes DISASSEMBLED (Instructions Inside the Package):

1) Join the different tubulars by means of special screws - bolts supplied
2) Secure the Roof Rack to the OPEN Longitudinal Handrails of the Car, using the 4x Screw-on Brackets




Although mouting is simple and intuitive, FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT.
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€232.53 Regular Price €239.72
Roof Rack Bars For Jeep Grand Cherokee WK-WH Limited version in Aluminum GOODYEAR | Load 90KG Double Anti-Theft Locking
  • -4%
  • Out of Stock
Add to Wishlist
Roof Rack Bars For Jeep Grand Cherokee WK-WH...
COMPATIBILITY:

- For JEEP GRAND CHEROKEE WK-WH versione LIMITED (2005-2010), WITH HIGH HANDRAILS (SEE PHOTO)


HANDRAILS NECESSARILY:

- Maximum distance between one and the other 125Cm


ASSEMBLY:

- Insert the lock key to remove the side covers and access the screws below
- Take a screwdriver and unscrew the screws, to make the feet open as much as possible
- Position the Roof Bars by hooking them to the Longitudinal Handrails
- Center the bars on the rails
- Tighten the screws of each foot until it locks correctly WITHOUT FORCE EXCESSIVELY
- Close the side covers by locking them with the key lock




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€93.57 Regular Price €97.47
Car Roof Rack Bars in Aluminum for Jeep Grand Cherokee WK-WH Renegade-Vision version GOODYEAR Load 90KG with Double Anti-Theft Locking System
  • -4%
  • Out of Stock
Add to Wishlist
Car Roof Rack Bars in Aluminum for Jeep Grand...
COMPATIBILITY:

For JEEP GRAND CHEROKEE WK-WH version RENEGADE-VISION (2005-2010)

HANDRAILS NECESSARILY:

- Maximum distance between one and the other 110CM


ASSEMBLY:

- Insert the lock key to remove the side covers and access the screws below
- Take a screwdriver and unscrew the screws, to make the feet open as much as possible
- Position the Roof Bars by hooking them to the Longitudinal Handrails
- Center the bars on the rails
- Tighten the screws of each foot until it locks correctly WITHOUT FORCE EXCESSIVELY
- Close the side covers by locking them with the key lock




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€93.57 Regular Price €97.47
H11 LED Bulbs for JEEP GRAND CHEROKEE WK-WH Low Beam CANbus Bulbs | 6500K White 8000LM
  • -4%
Add to Wishlist
H11 LED Bulbs for JEEP GRAND CHEROKEE WK-WH Low...
COMPATIBILITY:

- For JEEP GRAND CHEROKEE WK-WH (2005-2010), Low Beam


FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.
Add to Wishlist
€77.29 Regular Price €80.51
Front LICENSE PLATE Holder for Jeep Bracket SIDE RELOCATOR In Anodized STEEL tuning
  • -1%
Add to Wishlist
Front LICENSE PLATE Holder for Jeep Bracket...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€23.25 Regular Price €23.49
Front License Plate Holder for Jeep, Side Relocator Bracket, in Anodized Red Steel
  • -1%
Add to Wishlist
Front License Plate Holder for Jeep, Side...
COMPATIBILITY:

- For JEEP Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€23.25 Regular Price €23.49