Cee'd - Pro Cee' d II JD (12-18)

Kia Cee'd 2 JD | Tuning Accessories and Xenon LED Lights | QSPCARS

Active Filters

  • Color: Anodized Red
  • Color: Anodized Steel
  • Color: Intense Black
  • Color: Satin Black

There Are 4 Products.

Car Roof Rack Bars for Kia Ceed 2 Wagon ORIGINAL Nordrive Evos...
COMPATIBILITY:

- Kia Ceed 2 JD Sportswagon (2012-2018), with Flush Railings (Low Railings)


INSTALLATION:

- For a Perfect Installation Mount the Bars at Approximately 70cm Distance Between Them.
- For Perfect Soundproofing Mount the Bars in the rearmost possible area of the Vehicle.
- For Perfect Positioning and Centering during Assembly, consult the graduated scale on the bottom of the Bars.

- Mount the roof bars as per the instructions
- Position them on the roof with the pointed part facing backwards
- Open the locks with the key provided
- Unscrew the pin that allows the clamp to open to the maximum allowed
- Position the bars on the low rails centering them on the roof
- Tighten the pin that closes the clamp to the maximum allowed (max 6Nm)
- Close the locks and plug the remaining empty channels with the gaskets provided


ATTENTION it is good practice to carry out a control pit stop after the first 100km, then after 250km and finally after 500km.


Although simple and intuitive, FOR OPTIMAL INSTALLATION, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the item mounted and subsequently detached.
We trust in your common sense.
€150.08 Regular Price €157.98
Front LICENSE PLATE Holder for Kia Bracket SIDE RELOCATOR In...
COMPATIBILITY:

- For KIA Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€19.06 Regular Price €19.25
Front License Plate Holder for Kia, Side Relocator Bracket, in...
COMPATIBILITY:

- For KIA Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€19.06 Regular Price €19.25
Car TYRE SHINE Professional Applicable on Kia Wheels | Intense...
COMPATIBILITY:

- On Tyres External Edging of your Kia


APPLICATION: 1 With a Sponge, Cloth or Brush - 2 With a Spray Bottle
'' IT IS POSSIBLE TO APPLY IT WITHOUT DILUTING IT or with a little water, having a MORE INTENSE EFFECT with a more Strong colour"

1
- Thoroughly clean the tires before application
- Dilute 50Ml of Concentrate in 200Ml of Water in a Plastic Bucket
- Apply the product with a sponge, cloth or brush
- Wait for Drying

2
- Thoroughly clean the tires before application
- Dilute 1 Part Concentrate in 2-4 Parts Water and Insert it into a Spray Applicator
- Apply the product with a spray bottle
- Wait for Drying




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.
€18.03 Regular Price €18.98