Accessories and LED Lights for Audi A4 B8 11-15 Tuning

Car WASH COMPLETE Kit Professional Car Detailing for your Audi | Nanotechnology, Polishing, Cleaning | MADE IN EUROPE

-5%
New

Car WASH COMPLETE Kit Professional Car Detailing for your Audi...

COMPATIBILITY:

- On bodywork, rubber, plastics, metals, leather, fabrics, glass of your Audi
- All Products Can Be Used on Previously Treated or Waxed Bodywork without worrying about damaging any layers

RECOMMENDED TOTALITARY APPLICATION:

1 APPROXIMATE BODYWORK WASH WITH: Gloss Shampoo (GLOSS SHAMPOO)
- Dilute 20Ml of Shampoo for 10Lt of Water
- Apply Evenly and Wash with a High Quality Sponge or Brush removing Dirt and Residue
- Rinse with Clean Water
- Dry by buffing with a clean microfiber cloth or quality chamois leather

2 BODYWORK WASH FINISHING WITH: Waterless Car Wash (WATERLESS CAR WASH)
- Spray evenly on the surface to be treated
- Rub with a microfibre cloth to remove dirt and residues
- After 30-60 Seconds, Buff The Area With A Clean Microfiber Cloth

3 WHEEL WASHING WITH: Rim Cleaner (WHEEL CLEANER - FELGENREINIGER)
- Spray evenly on the surface to be treated
- Leave to act without removing it
- Remove Dirt gently with a Sponge or Rim Brush
- Rinse after about 2 minutes

4 BODYWORK POLISHING WITH: Hydro Wax (QUICK SHINE WAX)
- Then at the end of the car wash, spray evenly on the surface to be treated
- Wait 60 Seconds
- Polish the area with a clean microfiber cloth

5 NANOTECHNOLOGY WITH: Nanotechnological Hydro Wax (HYDRO ARMOR)
- With a dry and thoroughly washed vehicle
- Dilute 50ml of Nanotechnological Hydro Wax in 450ml of water
- Apply the product with a professional sponge
- Rinse with Clean Water
- Polish with a clean microfiber cloth

6 CLEAN THE GLASSES AND MIRRORS WITH: Antistatic Glass Cleaner (GLASS CLEANER SPRAY)
- Spray a small amount on the glass to be treated
- Rub with a Microfiber Cloth Removing Dirt and Residues
- Polish the area with a second clean microfiber cloth

7 PLASTIC CLEANING OR LEATHER TREATMENT WITH: Leather, Plastic and Vinyl Interior Treatment (INTERIOR SPRAY)
- Spray evenly on the surface to be treated
- Rub with a microfibre cloth to remove dirt and residues
- Polish The Area With A Clean Microfiber Cloth

8 CLEANING CARPET OR CLOTH SEATS WITH: Fabrics and Matts Cleaner Spray (CARPET AND TEXTILE CLEANER)
- Spray evenly on the surface to be treated
- Wait a few seconds
- Absorb the liquid with a clean microfiber cloth
- To remove stains, leave it to act for a few minutes
- Absorb the liquid with a microfiber cloth
- Repeat several times until the Stain disappears

9 TIRE SHINE WITH: Black Tire Shine Protective Concentrate (REIFENSHUTZ - TIRE PROTECT)
- Checking that you have thoroughly cleaned the tires before application
- Dilute 50Ml of Concentrate in 200Ml of Water in a Plastic Bucket
- Apply the product with a sponge, cloth or brush
- Wait for Drying

Even if simple and intuitive FOR OPTIMAL USE, WE ALWAYS RECOMMEND THE APPLICATION OF OUR PRODUCTS BY AN EXPERT, Always Checking The Risk Label relating to Dangerous Substances, as any form of Contact could be dangerous. We trust in your common sense.

We do not assume responsibility for: erroneous purchases - violations of regulations or laws of any state - damages that you could cause to yourself, to third parties, to the Vehicle or to the article itself, as we describe every single specification in detail.

€122.34 €128.78

Fog Light Grill Trim for AUDI A4 RS4 (B8) Facelift 11-15 | Honeycomb, Black Front Lower Bumper Cover Grille

-2%
New

Fog Light Grill Trim for AUDI A4 RS4 (B8) Facelift 11-15 |...

COMPATIBILITY:

- For AUDI A4 (B8) Facelift 11>15, WITH FOG LIGHT HOLE

INSTRUCTIONS:

- Just Replace the current one as a perfect replacement: 100% TESTED COMPATIBILITY

FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€116.26 €118.63

3M REAR Windows Tinting Film for Audi A4 Approved | OBSIDIAN 50 LIGHT

-15%
New

3M REAR Windows Tinting Film for Audi A4 Approved | OBSIDIAN...

COMPATIBILITY:

ATTENTION: in Italy application is only permitted on rear windows and rear windshields. We invite you to check the individual regulations of each state.

- For Audi A4 (All Versions and Years)
- Pre-cut, non-shaped pieces, 10% Larger in size, capable of covering all rear windows

APPLICATION:

- In addition to the film for the application you will need: Spatula, Cutter, Water and Fabric Softener, Nebulizer, Hairdryer or Heat Gun.
- The film must always be applied internally to the glass, however the external part is also necessary, which is fundamental for shaping and modeling the film before the final application on the internal part.

- Cut the film with a good margin compared to the size of the glass to be darkened (3-5cm).
- Thoroughly clean the glass internally and externally 2-3 times.
- Spray the mixture of water and softener mixed in a ratio of 1:10 on the outside of the glass.
- Apply the Film Externally to the Glass, Keeping the adhesive part of the Film facing towards you.
- Imprint the Film on the External Glass with the Spatula Forming a Large H.
- Shape the Film Using a Hairdryer and Spatula. The objective is to remove all the bubbles by making the Film adhere perfectly to the External Glass.
(the better it is processed now the easier it will be to move and apply the film internally later)
- Once the film is completely adhered without bubbles, shape it with the cutter by cutting off the excess, remaining within the margin of 2-3mm from the edge of the glass.
- Still leaving the film on the outside of the glass, make sure again that the inside of the glass is clean and proceed to spray the solution of water and softener inside the glass.
- Remove the protective film on the adhesive area of the film. Help yourself to remove it by spraying more water and fabric softener.
- Move the film to the inside of the glass, this time with the adhesive part facing the glass itself.
- Shape and flatten the film with the spatula, removing bubbles and liquid. (if the hairdryer has been used previously it will not be needed now)

- The glasses are operational after 24 hours
- Final adhesion is achieved after approximately 15 - 20 days at 18° C and in dry climate conditions.

MAINTENANCE AND CLEANING
Use high-quality cleaners specifically for glass surfaces. The cleaning system (cloth, sponge, etc.) must be wet and not abrasive with a pH value between 6 and 8 (neither too acidic nor too alkaline).

Although simple and intuitive FOR OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility if the item is assembled and subsequently removed.
We trust in your common sense.

€89.20 €104.94

3M REAR Windows Tinting Film for Audi A4 Approved | OBSIDIAN 25 MEDIUM LIGHT

-15%
New

3M REAR Windows Tinting Film for Audi A4 Approved | OBSIDIAN...

COMPATIBILITY:

ATTENTION: in Italy application is only permitted on rear windows and rear windshields. We invite you to check the individual regulations of each state.

- For Audi A4 (All Versions and Years)
- Pre-cut, non-shaped pieces, 10% Larger in size, capable of covering all rear windows

APPLICATION:

- In addition to the film for the application you will need: Spatula, Cutter, Water and Fabric Softener, Nebulizer, Hairdryer or Heat Gun.
- The film must always be applied internally to the glass, however the external part is also necessary, which is fundamental for shaping and modeling the film before the final application on the internal part.

- Cut the film with a good margin compared to the size of the glass to be darkened (3-5cm).
- Thoroughly clean the glass internally and externally 2-3 times.
- Spray the mixture of water and softener mixed in a ratio of 1:10 on the outside of the glass.
- Apply the Film Externally to the Glass, Keeping the adhesive part of the Film facing towards you.
- Imprint the Film on the External Glass with the Spatula Forming a Large H.
- Shape the Film Using a Hairdryer and Spatula. The objective is to remove all the bubbles by making the Film adhere perfectly to the External Glass.
(the better it is processed now the easier it will be to move and apply the film internally later)
- Once the film is completely adhered without bubbles, shape it with the cutter by cutting off the excess, remaining within the margin of 2-3mm from the edge of the glass.
- Still leaving the film on the outside of the glass, make sure again that the inside of the glass is clean and proceed to spray the solution of water and softener inside the glass.
- Remove the protective film on the adhesive area of the film. Help yourself to remove it by spraying more water and fabric softener.
- Move the film to the inside of the glass, this time with the adhesive part facing the glass itself.
- Shape and flatten the film with the spatula, removing bubbles and liquid. (if the hairdryer has been used previously it will not be needed now)

- The glasses are operational after 24 hours
- Final adhesion is achieved after approximately 15 - 20 days at 18° C and in dry climate conditions.

MAINTENANCE AND CLEANING
Use high-quality cleaners specifically for glass surfaces. The cleaning system (cloth, sponge, etc.) must be wet and not abrasive with a pH value between 6 and 8 (neither too acidic nor too alkaline).

Although simple and intuitive FOR OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility if the item is assembled and subsequently removed.
We trust in your common sense.

€89.20 €104.94

3M REAR Windows Tinting Film for Audi A4 Approved | OBSIDIAN 15 MEDIUM DARK

-15%
New

3M REAR Windows Tinting Film for Audi A4 Approved | OBSIDIAN...

COMPATIBILITY:

ATTENTION: in Italy application is only permitted on rear windows and rear windshields. We invite you to check the individual regulations of each state.

- For Audi A4 (All Versions and Years)
- Pre-cut, non-shaped pieces, 10% Larger in size, capable of covering all rear windows

APPLICATION:

- In addition to the film for the application you will need: Spatula, Cutter, Water and Fabric Softener, Nebulizer, Hairdryer or Heat Gun.
- The film must always be applied internally to the glass, however the external part is also necessary, which is fundamental for shaping and modeling the film before the final application on the internal part.

- Cut the film with a good margin compared to the size of the glass to be darkened (3-5cm).
- Thoroughly clean the glass internally and externally 2-3 times.
- Spray the mixture of water and softener mixed in a ratio of 1:10 on the outside of the glass.
- Apply the Film Externally to the Glass, Keeping the adhesive part of the Film facing towards you.
- Imprint the Film on the External Glass with the Spatula Forming a Large H.
- Shape the Film Using a Hairdryer and Spatula. The objective is to remove all the bubbles by making the Film adhere perfectly to the External Glass.
(the better it is processed now the easier it will be to move and apply the film internally later)
- Once the film is completely adhered without bubbles, shape it with the cutter by cutting off the excess, remaining within the margin of 2-3mm from the edge of the glass.
- Still leaving the film on the outside of the glass, make sure again that the inside of the glass is clean and proceed to spray the solution of water and softener inside the glass.
- Remove the protective film on the adhesive area of the film. Help yourself to remove it by spraying more water and fabric softener.
- Move the film to the inside of the glass, this time with the adhesive part facing the glass itself.
- Shape and flatten the film with the spatula, removing bubbles and liquid. (if the hairdryer has been used previously it will not be needed now)

- The glasses are operational after 24 hours
- Final adhesion is achieved after approximately 15 - 20 days at 18° C and in dry climate conditions.

MAINTENANCE AND CLEANING
Use high-quality cleaners specifically for glass surfaces. The cleaning system (cloth, sponge, etc.) must be wet and not abrasive with a pH value between 6 and 8 (neither too acidic nor too alkaline).

Although simple and intuitive FOR OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility if the item is assembled and subsequently removed.
We trust in your common sense.

€89.20 €104.94

Snow Socks for Audi A4 B8 11-15, EN-APPROVED for Italy and Europe | Alternative Snow Chains

-5%
New

Snow Socks for Audi A4 B8 11-15, EN-APPROVED for Italy and...

COMPATIBILITY:

- Audi A4 B8 Facelift (11-15), with Tires:

205/60 R16
225/55 R16
225/50 R17
245/45 R17
225/45 R18
245/40 R18
255/35 R19

INSTALLATION:

- 1 Take a sock and insert it into the upper part of the tire, making sure that it adheres well to the rear area of the tire.
- 2 Drive a little forward with the car, to repeat the operation and fix the sock also in the part of the rubber that previously touched the road surface.
- 3 drive for a hundred meters at low speeds, stopping the car again to check that the device has been installed correctly.
- 4 continue the journey in safety taking into account the Maximum Speed of 50Km-h.

We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damage, which you could cause to you, to third parties or to the item itself, as we detail every single specification, we trust in your common sense.

€61.73 €64.98

-7%
New

ORIGINAL Wheel Tyre Bags AUDI A4 with Logo for 14"-20" Tires |...

COMPATIBILITY:

- Audi A4 with Wheels Between 14 Inches and 20 Inches

USE:

- Use of Wheel Covering, Storage, Transport
- Insert the tire inside the bag by rolling it on it
- Close the strap with the internal Velcro
- Close Clips
- Insert Pins Into The Outer Hook Pocket

€60.38 €64.92

H7 LED Kit for Audi A4 B8 Facelift Low Beam CANbus Bulbs | 6500K Cool White 8000LM

-4%
New

H7 LED Kit for Audi A4 B8 Facelift Low Beam CANbus Bulbs |...

COMPATIBILITY:

- For Lowbeam AUDI A4 B8 FACELIFT (2011-2015)

Ok For all versions: Avant; Allroad

FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.

NON-STANDARD CASES

- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:

All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.

€61.88 €64.46

Rear Adhesive LED SPOILER For Audi A4 | Roof SEQUENTIAL LED Strip in Black Carbon Fiber Effect

-5%
New

Rear Adhesive LED SPOILER For Audi A4 | Roof SEQUENTIAL LED...

COMPATIBILITY:

- Specific for Audi A4

ASSEMBLY:

- Wash and thoroughly clean the surface where the spoiler is to be applied

- Remove the 3M adhesive film, and adhere the spoiler to the desired part

- Connect the 3 Wires, Respectively:

BLACK: Connect to Neutral Ground
RED: Connect to the Base Lighting System
WHITE: Connect to the STOP light switch-on function

(For a perfect fixing, use a bodywork thermal hair dryer)

It is possible to cut and then shorten the spoiler from the side where the wire is not present, but this modification will inevitably involve the decentralization of the Dynamic LED function.

FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€53.17 €55.97

Car PEDAL Covers for Audi A4 B8 AUTOMATIC Transmission | Sports Pedals Aluminum Non-slip Rubber

-5%
New

Car PEDAL Covers for Audi A4 B8 AUTOMATIC Transmission |...

COMPATIBILITY:

- For Audi A4 (B8) 2007-2015, with Automatic Gearbox
- For Audi S4 (B8) 2007-2015, with Automatic Gearbox

INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers

Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.

€52.23 €54.98

2x D3S Bi-Xenon Replacement Bulbs for AUDI A4 B8 FACELIFT HID 6.000K White Ice 35W

-2%
New

2x D3S Bi-Xenon Replacement Bulbs for AUDI A4 B8 FACELIFT HID...

COMPATIBILITY:

- AUDI A4 B8 Facelift (2011-2015) WITH STANDARD BI-XENON SYSTEM

MOUNTING:

- Replace the original bulbs by connecting the NEW REPLACEMENT BULBS

FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT

€52.97 €54.05

Rear Adhesive LED SPOILER For Audi A4 | Roof LED Strip in Translucent Black

-5%
New
Out of Stock

Rear Adhesive LED SPOILER For Audi A4 | Roof LED Strip in...

COMPATIBILITY:

- Specific for Audi A4

ASSEMBLY:

- Wash and thoroughly clean the surface where the spoiler is to be applied

- Remove the 3M adhesive film, and adhere the spoiler to the desired part

- Connect the 3 Wires, Respectively:

BLACK: Connect to Neutral Ground
RED: Connect to the Base Lighting System
WHITE: Connect to the STOP light switch-on function

(For a perfect fixing, use a bodywork thermal hair dryer)

For a perfect fit, it is possible to cut and then shorten the spoiler from the side where there is no clable; but, ATTENTION, once the modification has taken place, the Warranty and Right of Return will expire.

FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

€47.47 €49.97

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 13-15 | Silver Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 13-15 | Silver...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- RS4 (B8) 2013-2015 (Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 13-15 | Red Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 13-15 | Red...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- RS4 (B8) 2013-2015 (Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 13-15 | Black Aluminum Paddle Shifters

-8%
New
Out of Stock

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 13-15 | Black...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- RS4 (B8) 2013-2015 (Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI A4, S4 (B8) 11-15 | Silver Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI A4, S4 (B8) 11-15 |...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- A4 / S4 (B8) 2011-2015 (Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI A4, S4 (B8) 11-15 | Red Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI A4, S4 (B8) 11-15 | Red...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- A4 / S4 (B8) 2011-2015 (Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI A4, S4 (B8) 11-15 | Black Aluminum Paddle Shifters

-8%
New
Out of Stock

2 Steering Wheel Paddle Shift for AUDI A4, S4 (B8) 11-15 |...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- A4 / S4 (B8) 2011-2015 (Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 12-13 | Silver Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 12-13 | Silver...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- RS4 (B8) 2012-2013

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel, using the Sticker on the Front.
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 12-13 | Red Aluminum Paddle

-8%
New

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 12-13 | Red...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- RS4 (B8) 2012-2013

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel, using the Sticker on the Front.
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 12-13 | Black Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI RS4 (B8) 12-13 | Black...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- RS4 (B8) 2012-2013

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel, using the Sticker on the Front.
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI A4 (B8) 11-15 | Silver Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI A4 (B8) 11-15 | Silver...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- A4, S4 (B8) 2011-2015 (Ver. Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel, using the Sticker on the Front.
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI A4 (B8) 11-15 | Red Aluminum Paddle

-8%
New

2 Steering Wheel Paddle Shift for AUDI A4 (B8) 11-15 | Red...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- A4 / S4 (B8) 2011-2015 (Ver. Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel, using the Sticker on the Front.
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

2 Steering Wheel Paddle Shift for AUDI A4 (B8) 11-16 | Black Aluminum Paddle Shifters

-8%
New

2 Steering Wheel Paddle Shift for AUDI A4 (B8) 11-16 | Black...

COMPATIBILITY:

- COMPATIBLE WITH AUDI CARS WITH SEQUENTIAL AUTOMATIC TRANSMISSION, AND STEERING WHEEL LEVERS (See Photo 2):

- A4 / S4 (B8) 2011-2015 (Ver. Facelift)

ASSEMBLY:

- Adhere the Pads on the Current Gear Levers to the Steering Wheel, using the Sticker on the Front.
- Tighten the screws to ensure that they anchor perfectly to the Actual Pads.

(Although Simple and Intuitive, WE ALWAYS RECOMMEND ASSEMBLY BY AN EXPERT IN THE SECTOR, TO AVOID POSSIBLE DAMAGE TO THINGS OR PEOPLE. WE ALWAYS DO NOT RECOMMEND DO IT YOURSELF)

€43.22 €46.98

Left Banner

Join Our Newsletter

Info About QualitySPCars

Easy Shopping

Free shipping (Italy)

Flash Shipping

Return an Item

6/7 Assistance - Chat with us

30 Day Return, 0 Worries

Safe Payments

Shipping Partners

Left Banner  

Join Our Newsletter

Info About QualitySPCars

Easy Shopping

Free shipping (Italy)

Flash Shipping

Return an Item

6/7 Assistance - Chat with us

30 Day Return, 0 Worries

Safe Payments

Shipping Partners

Left Banner