PSX24W

COMPATIBILITY:

- All cars with HALOGEN PSX24W BULBS



FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- LOCKING ON THE CAR LIKE THE OLD HALOGEN (IT HAS THE SAME DIMENSIONS !!)


ADVICE:

Although very powerful (8.000 lumens) and can be used as a low beam, we recommend the installation of these lamps ONLY on secondary light beams (FOG LIGHTS / HIGH BEAMS) as it was designed and built for these functions.

COMPATIBILITY:

- Vehicles with PSX24W Halogen Lamp
- Plug & Play installation


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.

COMPATIBILITY:

- All Cars and Bikes with HALOGEN PSX24W BULBS



FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- LOCKING ON THE CAR LIKE THE OLD HALOGEN (IT HAS THE SAME DIMENSIONS !!)


ADVICE:

Although very powerful (4.000 lumens) and can be used as a low beam, we recommend the installation of these lamps ONLY on secondary light beams (FOG LIGHTS / HIGH BEAMS) as it was designed and built for these functions.

COMPATIBILITY:

- Vehicles with PSX24W Halogen Lamp
- Plug & Play installation


UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:

THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.

The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes

THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.

The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.