Legacy IV (03-09)

Accessories and LED Lights for Subaru Legacy 4 Tuning | QSPCARS

Active Filters

  • Color: 6.500K Ice White Light
  • Color: Anodized Red
  • Color: Translucent Black - Red Light
H7 LED Kit for Subaru LEGACY 4 Low Beam | LED Bulbs CANbus 6500K 12000LM
  • -6%
Add to Wishlist
H7 LED Kit for Subaru LEGACY 4 Low Beam | LED...
COMPATIBILITY:

- For SUBARU LEGACY 4 (2003-2009), Low Beam


FOR AN OPTIMUM MOUNTING, WE RECOMMENDS:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.
Add to Wishlist
€91.73 Regular Price €97.59
Rear Adhesive LED SPOILER For Subaru Legacy | Roof LED Strip in Translucent Black
  • -5%
  • Out of Stock
Add to Wishlist
Rear Adhesive LED SPOILER For Subaru Legacy |...
COMPATIBILITY:

- Specific for Subaru Legacy


ASSEMBLY:

- Wash and thoroughly clean the surface where the spoiler is to be applied

- Remove the 3M adhesive film, and adhere the spoiler to the desired part

- Connect the 3 Wires, Respectively:

BLACK: Connect to Neutral Ground
RED: Connect to the Base Lighting System
WHITE: Connect to the STOP light switch-on function

(For a perfect fixing, use a bodywork thermal hair dryer)

For a perfect fit, it is possible to cut and then shorten the spoiler from the side where there is no clable; but, ATTENTION, once the modification has taken place, the Warranty and Right of Return will expire.





FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€57.92 Regular Price €60.96
Front License Plate Holder for Subaru, Side Relocator Bracket, in Anodized Red Steel
  • -1%
Add to Wishlist
Front License Plate Holder for Subaru, Side...
COMPATIBILITY:

- For SUBARU Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€23.25 Regular Price €23.49