4C (13-19)

Alfa 4C | Tuning Accessories and Xenon LED Lights | QSPCARS

Active Filters

  • Color: Anodized Red
  • Color: Garnet red
  • Color: Grey
  • Color: Metallic Silver
Red TIRE CRADLES For Alfa 4C, Flat Stop Protector | Original Kuberth MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red TIRE CRADLES For Alfa 4C, Flat Stop Protector | Original...
COMPATIBILITY

- For Alfa Romeo 4C


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€365.66 Regular Price €389.00
Front License Plate Holder for Alfa Romeo, Side Relocator Bracket, in Anodized Red Steel
  • -1%
  • New
Add to Wishlist
Front License Plate Holder for Alfa Romeo, Side Relocator...
COMPATIBILITY:

- For ALFA ROMEO Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25
Professional CROSS KEY Suitable for for Alfa Romeo Wheels | in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
  • New
Add to Wishlist
Professional CROSS KEY Suitable for for Alfa Romeo Wheels | in...
COMPATIBILITY:

- Wheels Vehicles, including Alfa romeo
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96