Left Banner

  • LeftBanner 1

Copripedali

Metal Sports Car Pedal Covers | QSPCARS

Active Filters

Car PEDAL Covers for PORSCHE AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Porsche Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Rubber Hole Cover Present on the Current Foot Rest, there is a Bolt underneath
- Unscrew the Bolt
- With the help of a Lever, Apply Pressure to Remove the entire Cover of the Current Foot Res
- Position the new Interlocking Foot Rest, reassembling the Bolt and finally the Rubber Hole Cover




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€55.08 Regular Price €57.98
Car PEDAL Covers for VW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Volkswagen Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Rubber Hole Cover Present on the Current Foot Rest, there is a Bolt underneath
- Unscrew the Bolt
- With the help of a Lever, Apply Pressure to Remove the entire Cover of the Current Foot Res
- Position the new Interlocking Foot Rest, reassembling the Bolt and finally the Rubber Hole Cove




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€54.13 Regular Price €56.98
Car PEDAL Covers for AUDI AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Audi Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Rubber Hole Cover Present on the Current Foot Rest, there is a Bolt underneath
- Unscrew the Bolt
- With the help of a Lever, Apply Pressure to Remove the entire Cover of the Current Foot Res
- Position the new Interlocking Foot Rest, reassembling the Bolt and finally the Rubber Hole Cover


Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€53.18 Regular Price €55.98
Car PEDAL Covers for BMW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- BMW Cars with Automatic Gearbox
**Attention: Check the Shape of the Side of the Accelerator pedal (see photo n.)**


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers (The accelerator pedal must be inserted from top to bottom)
3) Attach the Footrest Using the Adhesive on the Back




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€49.38 Regular Price €51.98
Car PEDAL Covers for BMW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- BMW Cars with Automatic Gearbox
**Attention: Check the Shape of the Side of the Accelerator Pedal (see photo n.2)**


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers (The accelerator pedal must be inserted from top to bottom)
3) Attach the Footrest Using the Adhesive on the Back



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€49.38 Regular Price €51.98
Car PEDAL Covers for AUDI AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Audi Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Rubber Hole Cover Present on the Current Foot Rest, there is a Bolt underneath
- Unscrew the Bolt
- With the help of a Lever, Apply Pressure to Remove the entire Cover of the Current Foot Rest
- Position the new Interlocking Foot Rest, reassembling the Bolt and finally the Rubber Hole Cover



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€49.38 Regular Price €51.98
Car PEDAL Covers for Alfa Romeo AUTOMATIC Transmission | Steel...
COMPATIBILITY:

- Alfa Romeo Cars with Automatic Gearbox



INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) Attach the Footrest Using the Adhesive on the Back




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€47.48 Regular Price €49.98
Car PEDAL Covers for Alfa Romeo AUTOMATIC Transmission | Steel...
COMPATIBILITY:

- Alfa Romeo Cars with Automatic Gearbox



INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) Attach the Footrest Using the Adhesive on the Back




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€47.48 Regular Price €49.98
Car PEDAL Covers for BMW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- BMW Cars with Automatic Gearbox
**Attention: Check the Shape of the Side of the Accelerator Pedal (see photo n.)**


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers (The accelerator pedal must be inserted from top to bottom)
3) Attach the Footrest Using the Adhesive on the Back



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€47.48 Regular Price €49.98
Car PEDAL Covers for BMW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- BMW Cars with Automatic Gearbox


INSTALLATION:

1) Remove the rubber pedal cover only for the brake, for the accelerator and the foot rest The fixing will be carried out directly on the existing support
2) Place the new pedal covers on the pedals and, through the holes present, make marks on the pedal in the 4 fixing corners
3) Move the new pedal covers and now drill the 4 traced slots with a drill and 3mm bit
4) Clean the Pedals and Position the new Pedal Covers which will be fixed with Bolts, Washers and Nuts present in the Fixing Kit
5) When fixing, position the washer in the front part of the pedal cover and immediately after the bolt, in the rear part position the ring followed by the nut and screw
6) Tighten the screwing with the spanner present in the fixing kit
7) Follow the same procedure for the Accelerator and Foot Rest pedal


Attention: the Foot Rest will be fixed with the Self-tapping Screws always present in the Fixing Kit.


Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€46.53 Regular Price €48.98
Car PEDAL Covers for BMW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- BMW Cars with Automatic Gearbox
**Attention: Check the Shape of the Side of the Accelerator Pedal (see photo n.)**


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers (The accelerator pedal must be inserted from top to bottom)



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€45.58 Regular Price €47.98
Car PEDAL Covers for Audi Manual Transmission | Aluminum and...
COMPATIBILITY:

- AUDI Cars with Manual Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Now it is possible to unhook the plastic side part by extracting the existing foot rest
- Mount the new Foot Rest by fitting the clip in the upper part and close everything by repeating the operations already carried out in reverse



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€45.58 Regular Price €47.98
Car PEDAL Covers for BMW Manual Transmission | Sports Pedals...
COMPATIBILITY:

- VW Cars with Manual Gearbox
**Attention: Check the Shape of the Side of the Accelerator Pedal (see photo n.)**

INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers (The accelerator pedal must be inserted from top to bottom)




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€44.63 Regular Price €46.98
Car PEDAL Covers for BMW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- BMW Cars with Automatic Gearbox
**Attention: Check the Shape of the Side of the Accelerator Pedal (see photo n.)**


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers (The accelerator pedal must be inserted from top to bottom)



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€42.73 Regular Price €44.98
Car PEDAL Covers for Mercedes AMG AUTOMATIC Gearbox | Aluminum...
COMPATIBILITY:

- MERCEDES Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€42.54 Regular Price €44.78
Car PEDAL Covers for AUDI AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Audi Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers and, for the Accelerator Pedal, Close the Tabs
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Unscrew the Torx screw on the side of the current foot rest and remove it
- Mount the new Foot Rest by interlocking it and screwing the Torx screw to secure it, finally close everything by repeating the operations already carried out in reverse




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€37.98 Regular Price €39.98
Car PEDAL Covers for SEAT AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Seat Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers and, for the Accelerator Pedal, Close the Tabs
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Unscrew the Torx screw on the side of the current foot rest and remove it
- Mount the new Foot Rest by interlocking it and screwing the Torx screw to secure it, finally close everything by repeating the operations already carried out in reverse




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€37.98 Regular Price €39.98
Car PEDAL Covers for SKODA AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- Skoda Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers and, for the Accelerator Pedal, Close the Tabs
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Unscrew the Torx screw on the side of the current foot rest and remove it
- Mount the new Foot Rest by interlocking it and screwing the Torx screw to secure it, finally close everything by repeating the operations already carried out in reverse




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€37.98 Regular Price €39.98
Car PEDAL Covers for VW AUTOMATIC Gearbox | Aluminum and...
COMPATIBILITY:

- VW Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers and, for the Accelerator Pedal, Close the Tabs
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Unscrew the Torx screw on the side of the current foot rest and remove it
- Mount the new Foot Rest by interlocking it and screwing the Torx screw to secure it, finally close everything by repeating the operations already carried out in reverse



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€37.98 Regular Price €39.98
Car PEDAL Covers for SKODA AUTOMATIC Gearbox | Sports Pedals...
COMPATIBILITY:

- Skoda Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Now it is possible to unhook the plastic side part by extracting the existing foot rest
- Fit the new Interlocking Foot Rest and close everything by repeating the operations already carried out in reverse



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€37.03 Regular Price €38.98
Car PEDAL Covers for VW AUTOMATIC Gearbox | Sports Pedals...
COMPATIBILITY:

- VW Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Now it is possible to unhook the plastic side part by extracting the existing foot rest
- Fit the new Interlocking Foot Rest and close everything by repeating the operations already carried out in reverse



Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€37.03 Regular Price €38.98
Car PEDAL Covers for VW Manual Transmission | Aluminum and...
COMPATIBILITY:

- VW Cars with Manual Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Now it is possible to unhook the plastic side part by extracting the existing foot rest
- Fit the new Interlocking Foot Rest and close everything by repeating the operations already carried out in reverse




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€36.84 Regular Price €38.78
Car PEDAL Covers for SEAT AUTOMATIC Gearbox | Sports Pedals...
COMPATIBILITY:

- Seat Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Now it is possible to unhook the plastic side part by extracting the existing foot rest
- Fit the new Interlocking Foot Rest and close everything by repeating the operations already carried out in reverse




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€36.08 Regular Price €37.98
Car PEDAL Covers for CUPRA AUTOMATIC Gearbox | Sports Pedals...
COMPATIBILITY:

- Cupra Cars with Automatic Gearbox


INSTALLATION:

1) Remove the existing rubbers or plastics from the pedals
2) Snap on the new pedal covers
3) To assemble the foot rest proceed as follows:

- Remove the Engine Compartment Opening Handle
- Remove the hook that holds the Engine Compartment Opening Handle securely
- Unhook and Remove the Engine Compartment Opening Handle by pulling it outwards
- Remove the Round Rubber Hole Cover
- Remove the Clip Screw with a Fixed Screwdriver, Rotating it Anticlockwise to Unhook and Extract it
- Now it is possible to unhook the plastic side part by extracting the existing foot rest
- Fit the new Interlocking Foot Rest and close everything by repeating the operations already carried out in reverse




Even if simple and intuitive FOR AN OPTIMUM ASSEMBLY, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€35.13 Regular Price €36.98