Giulietta (10-18)

Alfa Giulietta | Tuning Accessories and LED Lights | QSPCARS

Active Filters

  • Function: Light Transformation
LED Bulbs LOW + HIGH BEAM for Alfa Romeo GIULIETTA (10-18) | CANbus, White Light 6500K Professional
  • -6%
  • New
Add to Wishlist
LED Bulbs LOW + HIGH BEAM for Alfa Romeo GIULIETTA (10-18) |...
COMPATIBILITY:

- For Alfa Romeo Giulietta (2010-2018), Lowbeam + Highbeam


FOR AN OPTIMUM MOUNTING, WE RECOMMENDS:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.
Add to Wishlist
€134.41 Regular Price €142.99
H7 LED Kit for Alfa Giulietta 10-18 Low Beam | Led Bulbs Ice White CANbus 111W | 6000K 19000LM
  • -4%
  • New
Add to Wishlist
H7 LED Kit for Alfa Giulietta 10-18 Low Beam | Led Bulbs Ice...
COMPATIBILITY:

- Alfa Romeo Giulietta (2010-2018), Lowbeam


FOR OPTIMUM ASSEMBLY, WE RECOMMEND:

- Disassembly of your halogen
- Control: Connect only the LED socket (PLUG AND PLAY); if there are no problems, proceed with assembly
- Lock only the LED ring on the car: Remove the ring from the LED by making rotary movements until it comes off
- Connect the socket and proceed with locking the LED bulbs: Insert the ring lamp, already previously fixed inside the headlight, and lock it inside with rotary movements.


EXTRAS AND POSSIBLE CASES

- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not mere replacement bulbs, in RARE cases it could have a larger size. If installing the kit does not allow the headlight to be closed, visit our store for DEEPER caps.

- ADAPTERS:

Cars that do not have the CLASSIC METALLIC CLIP for locking the bulb in the headlight may require simple adapters, usually in the possession of the car electrician or easily available in OUR STORE. Unfortunately, their compatibility does not always depend on the model or year of the car, therefore it depends on your type of locking.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We also remind you that these are Aftermarket Items, designed for Full compatibility and operation on the designated vehicle, but they remain products that may not be permitted for use on public roads.

We trust in your common sense.
Add to Wishlist
€114.97 Regular Price €119.76
H7 LED Kit for ALFA ROMEO GIULIETTA Low Beam | LED Bulbs CANbus 6500K 12000LM
  • -6%
  • New
Add to Wishlist
H7 LED Kit for ALFA ROMEO GIULIETTA Low Beam | LED Bulbs...
COMPATIBILITY:

- ALFA ROMEO GIULIETTA with HALOGEN H7 BULBS
- Lenticular Headlight (With Lens)


FOR AN OPTIMUM MOUNTING, WE RECOMMENDS:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.
Add to Wishlist
€75.19 Regular Price €79.99
LED Side Markers for Alfa Romeo Giulietta Sequential Dynamic, Black Smoke Lens, E-Approved, Canbus No Error
  • -5%
  • New
Add to Wishlist
LED Side Markers for Alfa Romeo Giulietta Sequential Dynamic,...
COMPATIBILITY:

- Alfa Romeo Giulietta (2010-2018)



INSTRUCTIONS:

- Remove your side marker, pushing and sliding it forward or backward (IT WILL SPIT)

- Disconnect the socket, and connect it to the New one, Repeat the same operation on the CONTRARY.


FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMEND THE INSTALLATION BY AN EXPERT



We do not take responsibility for: erroneous purchases-violations of regulations or laws of any state-damages, which could cause you, third parties or the same article. as we describe every single specification in detail.

Add to Wishlist
€30.30 Regular Price €31.89
LED Side Markers for Alfa Romeo Giulietta Sequential Dynamic E-Approved, Canbus No Error
  • -5%
  • New
Add to Wishlist
LED Side Markers for Alfa Romeo Giulietta Sequential Dynamic...
COMPATIBILITY:

- Alfa Romeo Giulietta (2010-2018)


INSTRUCTIONS:

- Remove your side marker, pushing and sliding it forward or backward (IT WILL SPIT)

- Disconnect the socket, and connect it to the New one, Repeat the same operation on the CONTRARY.


FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMEND THE INSTALLATION BY AN EXPERT



We do not take responsibility for: erroneous purchases-violations of regulations or laws of any state-damages, which could cause you, third parties or the same article. as we describe every single specification in detail.

Add to Wishlist
€28.40 Regular Price €29.89
2 License Plate FULL LED for Alfa Romeo GIULIETTA (10-18) | CANBUS 18 LEDS 6.500K White ICE Plug & Play
  • -4%
  • New
Add to Wishlist
2 License Plate FULL LED for Alfa Romeo GIULIETTA (10-18) |...
COMPATIBILITY:

- ALFA ROMEO GIULIETTA (2010-2018)


INSTRUCTION:

- Remove the current led plates, using a screwdriver if necessary, inserting the tip in the side part of the plate and apply pressure towards the outside: the plate will come out.

- Disconnect the cable and disconnect definitely the plate.

- Connect the new LED PLATE to the cable and replace it inside the housing. Repeat the same operation with the second plate.


FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMENDS THE INSTALLATION BY AN EXPERT


We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail. WE WILL NOT ACCEPT RETURNS FOR INCOMPATIBILITY or WRONG PURCHASES
Add to Wishlist
€20.78 Regular Price €21.65