Left Banner

  • LeftBanner 1

Garage Set-Ups

Make the Garage a Perfect Auto Display | QSPCARS

Active Filters

  • Item: Container Trunks
  • Item: Cross Keys
  • Item: Professional Squeegees
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design Route 66 | 320 Lt
  • -6%
  • New
  • Out of Stock
Add to Wishlist
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Black Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Black Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€46.98 Regular Price €49.98
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With Fiat 500 Rossa in Rome | 320 Lt
  • -6%
  • New
Add to Wishlist
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Red Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Red Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€46.98 Regular Price €49.98
CROSS KEY for Car Wheels Professional in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
  • New
Add to Wishlist
CROSS KEY for Car Wheels Professional in Hardened STEEL |...
COMPATIBILITY:

- Almost All Vehicle Wheels
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96