Garage Set-Ups

Make the Garage a Perfect Auto Display | QSPCARS

Active Filters

  • Item: Car Jack Lifts
  • Item: Container Trunks
  • Item: Cross Keys
  • Item: Save Tires Anti Ovalizing
  • Item: Tool Case
Red Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel Saver | Original KUBERTH S Supercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€365.66 Regular Price €389.00
Black Carbon Tire Cradles Flat Stop Protector, Anti-Ovalizing | Original KUBERTH X Hypercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Carbon Tire Cradles Flat Stop Protector, Anti-Ovalizing...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€328.06 Regular Price €349.00
Black Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel Saver | Original KUBERTH S Supercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€309.26 Regular Price €329.00
Red Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver for CLASSIC CARS | Original Kuberth V MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2.200 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€252.86 Regular Price €269.00
Black Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver for CLASSIC CARS | Original Kuberth V MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Tire Cradles Flat Stop Protector Anti-Ovalizing Tire...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2.200 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€224.66 Regular Price €239.00
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner GERMANY Workshop | 2.2T Max
  • -6%
  • New
Add to Wishlist
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner...
COMPATIBILITY:

- Vehicles Weighing up to 3 tons
- Minimum H 85mm - Maximum H 380mm


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Use the lever, starting the lift, until the bottom of the car is reached with the rubber bearing, until it comes into contact with the vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Strokes
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€126.88 Regular Price €134.98
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 2.0 Ton | TÜV GS Approved
  • -12%
  • New
  • Out of Stock
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- SUVs and Large Sedans, of Segment E (Max Weight 2.8 Tons)
- Ex. Audi Q7, Range Rover Sport, Bmw 7 Series, Porsche Cayenne, VW Touareg, Etc...
- Minimum H 98mm - Maximum H 442m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€51.90 Regular Price €58.98
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design Route 66 | 320 Lt
  • -6%
  • New
  • Out of Stock
Add to Wishlist
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Black Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Black Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€46.98 Regular Price €49.98
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With Fiat 500 Rossa in Rome | 320 Lt
  • -6%
  • New
Add to Wishlist
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Red Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Red Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
Add to Wishlist
€46.98 Regular Price €49.98
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 1.5 Ton | TÜV GS Approved
  • -10%
  • New
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- Sedans and Medium SUVs, of Segment D (Max Weight 2.1 Tons)
- Ex. VW Tiguan, Mercedes C-Class, Nissan Qashqai, Bmw Serie 3, Audi A4, Etc...
- Minimum H 105mm - Maximum H 380m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€44.81 Regular Price €49.79
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 1.0 Ton | TÜV GS Approved
  • -10%
  • New
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- Compact Vehicles, of Segment C (Max Weight 1.6 Tons)
- Ex. VW Golf, Opel Astra, Ford Focus, Seat Leon, Etc...
- Minimum H 90mm - Maximum H 348m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€39.58 Regular Price €43.98
CROSS KEY for Car Wheels Professional in Hardened STEEL | Bolts 17 - 19 - 21 - 23
  • -3%
  • New
Add to Wishlist
CROSS KEY for Car Wheels Professional in Hardened STEEL |...
COMPATIBILITY:

- Almost All Vehicle Wheels
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.
Add to Wishlist
€17.42 Regular Price €17.96