Garage Set-Ups

Make the Garage a Perfect Auto Display | QSPCARS

Active Filters

  • Item: Container Trunks
  • Item: Portable Compressor
  • Item: Wall Tool Panels
Mini Portable Car COMPRESSOR PROFESSIONAL Heyner GERMANY |...
COMPATIBILITY:

- Vehicles, Motorcycles, SUVs, Bikes, Trucks, Camping, Inflatable Devices (Inflatable Boats, balls, etc...)
- 12V Power Supply
- Pressure up to 10 bar / 150 psi
- Standard and Non-Standard Valves (4 Adapters Supplied)


USE:

(Illustrated Instructions Supplied)

- Position the Vehicle on an Absolutely Flat Surface
- Engage the parking brake
- Start the Vehicle Engine
- Connect the Cigarette Lighter Socket to the Vehicle (12V ONLY)
- Connect the Inflation Hose to the Valve of the Wheel or Device you want to inflate
- Press the "R" button to set the desired pressure by increasing or decreasing the value with the "+" or "-" button
- Wait 3 Seconds from Preset Setting
- Start the compressor, the compressor will stop at the preset pressure which will remain in memory
- For the next inflations it will only be necessary to start the compressor
- In dark situations, press the torch button to turn on the built-in LED torch



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
€56.98 Regular Price €59.98
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design Route 66 | 320 Lt
  • -6%
  • New
  • Out of Stock
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL Design...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Black Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Black Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€46.98 Regular Price €49.98
Robust and Roomy Storage Trunk from EXTERNAL - INTERNAL With...
COMPATIBILITY:

- With Hot and Cold Environments
- Eternal or Internal Use
- Environments in contact with solvents and chemical agents


ASSEMBLY: 5 minutes.

- Use the Two Red Panels as sides
- Use the Two Neutral Panels as Base and Back Panel
- Fit the 4 Panels Mentioned Previously with Simple pressure
- Insert 2 plastic modules that will allow opening and closing of the cover in the upper part of the neutral rear panel.
- Insert 1st Interlocking Front Screen Printed Panel
- Mount the 2nd screen-printed panel by inserting 2 Plastic Modules on the Rear That will allow it to open and close - Lock them by mounting the two Red Bands
- Assemble the Interlocking Cover by matching the 4 Opening and Closing Plastic Modules.



Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
€46.98 Regular Price €49.98