Garage Set-Ups

Make the Garage a Perfect Auto Display | QSPCARS

Active Filters

  • Item: Car Jack Lifts
  • Item: Save Tires Anti Ovalizing
Red Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel Saver | Original KUBERTH S Supercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€365.66 Regular Price €389.00
Black Carbon Tire Cradles Flat Stop Protector, Anti-Ovalizing | Original KUBERTH X Hypercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Carbon Tire Cradles Flat Stop Protector, Anti-Ovalizing...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€328.06 Regular Price €349.00
Black Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel Saver | Original KUBERTH S Supercar MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Tire Cradles Flat Stop Protector, Anti-Ovalizing Wheel...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2,700 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€309.26 Regular Price €329.00
Red Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver for CLASSIC CARS | Original Kuberth V MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Red Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2.200 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€252.86 Regular Price €269.00
Black Tire Cradles Flat Stop Protector Anti-Ovalizing Tire Saver for CLASSIC CARS | Original Kuberth V MADE IN ITALY
  • -6%
  • New
Add to Wishlist
Black Tire Cradles Flat Stop Protector Anti-Ovalizing Tire...
COMPATIBILITY:

- Cars with wheels between 14 inches and 23 inches
- Wheel diameter max 750 mm
- Vehicles Max Weight 2.200 Kg


APPLICATION: SEE THE VIDEO TUTORIAL By scanning QR CODE in Listing Images

- Place Easyrise in front of each wheel.
- Press on the gelpads to make them adhere correctly to the ground (if they do not adhere correctly, clean the gelpads with a degreaser and water).
- Perform a brief reverse motion to facilitate climbing onto the cushion.
- Climb onto the cushion with inertia without accelerating on the ramp.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We trust in your common sense.
Add to Wishlist
€224.66 Regular Price €239.00
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner GERMANY Workshop | 2.2T Max
  • -6%
  • New
Add to Wishlist
PROFESSIONAL CAR JACK with LOW TROLLEY | Hydraulic Lift Heyner...
COMPATIBILITY:

- Vehicles Weighing up to 3 tons
- Minimum H 85mm - Maximum H 380mm


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Use the lever, starting the lift, until the bottom of the car is reached with the rubber bearing, until it comes into contact with the vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Strokes
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€126.88 Regular Price €134.98
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 2.0 Ton | TÜV GS Approved
  • -12%
  • New
  • Out of Stock
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- SUVs and Large Sedans, of Segment E (Max Weight 2.8 Tons)
- Ex. Audi Q7, Range Rover Sport, Bmw 7 Series, Porsche Cayenne, VW Touareg, Etc...
- Minimum H 98mm - Maximum H 442m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€51.90 Regular Price €58.98
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 1.5 Ton | TÜV GS Approved
  • -10%
  • New
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- Sedans and Medium SUVs, of Segment D (Max Weight 2.1 Tons)
- Ex. VW Tiguan, Mercedes C-Class, Nissan Qashqai, Bmw Serie 3, Audi A4, Etc...
- Minimum H 105mm - Maximum H 380m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€44.81 Regular Price €49.79
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY | Capacity 1.0 Ton | TÜV GS Approved
  • -10%
  • New
Add to Wishlist
Car Jack PROFESSIONAL Portable Lifter Heyner GERMANY |...
COMPATIBILITY:

- Compact Vehicles, of Segment C (Max Weight 1.6 Tons)
- Ex. VW Golf, Opel Astra, Ford Focus, Seat Leon, Etc...
- Minimum H 90mm - Maximum H 348m


USE:

(Illustrated Instructions Provided)

- Place the vehicle on an absolutely flat surface
- Engage the parking brake
- Engage First or Second Gear
- With the vehicle not in motion, insert the jack under the car in correspondence with the steering column, in the area where you want to lift it (in flat position)
- Rotate the Screw Crank Clockwise, starting the lifting, until the Rubber Bearing reaches the bottom of the Car, until it comes into contact with the Vehicle
- Make sure the Contact Point is Stable by attempting the lift for 4 Handle Turns
- Sure of gripping the vehicle and the ground vertically, proceed to lift the car



Although simple and intuitive FOR AN OPTIMAL FITTING, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the article assembled and subsequently detached.
We trust in your common sense.
Add to Wishlist
€39.58 Regular Price €43.98