Italiano
Inglese
Francese
Tedesco
Spagnolo
- New
Turbo Sound Whistle Simulator Pipe Car Tuning | Whistle...
COMPATIBILITY REQUIREMENTS:
- Can be installed on Straight Muffler with Diameter Between 44mm and 55mm
- Motorization Between 2.000cc and 2.400cc
* In the case of a double muffler, a whistle will be required for each single pipe
* By installing it on different dimmeters or engines the final result could be compromised * "It remains a simulator, not a turbine."
* It is also possible to install it on Curve mufflers, but an Adaptation Modification (Curvando) is required "We do not assume responsibility for a modified product"
ASSEMBLY:
- Check there is enough space in depth to accommodate the valve inside the muffler
- Insert the Turbo Sound valve into the muffler
- Fasten the Bolt Underneath Lightly
- Test the effect in acceleration by adjusting the closing and opening of the valve until the slight hissing sounds clear (screw and unscrew)
- Once the correct positioning has been found, lock the valve with the key and bolt supplied
- Tighten the Fixing Bolt to the Muffler, and Repeat This Operation Every 4-7 Days of Use
FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.
- Can be installed on Straight Muffler with Diameter Between 44mm and 55mm
- Motorization Between 2.000cc and 2.400cc
* In the case of a double muffler, a whistle will be required for each single pipe
* By installing it on different dimmeters or engines the final result could be compromised * "It remains a simulator, not a turbine."
* It is also possible to install it on Curve mufflers, but an Adaptation Modification (Curvando) is required "We do not assume responsibility for a modified product"
ASSEMBLY:
- Check there is enough space in depth to accommodate the valve inside the muffler
- Insert the Turbo Sound valve into the muffler
- Fasten the Bolt Underneath Lightly
- Test the effect in acceleration by adjusting the closing and opening of the valve until the slight hissing sounds clear (screw and unscrew)
- Once the correct positioning has been found, lock the valve with the key and bolt supplied
- Tighten the Fixing Bolt to the Muffler, and Repeat This Operation Every 4-7 Days of Use
FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.
€11.98
