LED Kit H7

COMPATIBILITY:

- Cars and Motorcycles with H7 Halogen Bulb in Projector Headlights


FOR OPTIMUM ASSEMBLY, WE RECOMMEND:

- Disassembly of your halogen
- Control: Connect only the LED socket (PLUG AND PLAY); if there are no problems, proceed with assembly
- Lock only the LED ring on the car: Remove the ring from the LED by making rotary movements until it comes off
- Connect the socket and proceed with locking the LED bulbs: Insert the ring lamp, already previously fixed inside the headlight, and lock it inside with rotary movements.


EXTRAS AND POSSIBLE CASES

- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not mere replacement bulbs, in RARE cases it could have a larger size. If installing the kit does not allow the headlight to be closed, visit our store for DEEPER caps.

- ADAPTERS:

Cars that do not have the CLASSIC METALLIC CLIP for locking the bulb in the headlight may require simple adapters, usually in the possession of the car electrician or easily available in OUR STORE. Unfortunately, their compatibility does not always depend on the model or year of the car, therefore it depends on your type of locking.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We also remind you that these are Aftermarket Items, designed for Full compatibility and operation on the designated vehicle, but they remain products that may not be permitted for use on public roads.

We trust in your common sense.

COMPATIBILITY:

- Cars and Motorcycles with H7 Halogen Bulb in Projector Headlights


FOR OPTIMUM ASSEMBLY, WE RECOMMEND:

- Disassembly of your halogen
- Control: Connect only the LED socket (PLUG AND PLAY); if there are no problems, proceed with assembly
- Lock only the LED ring on the car: Remove the ring from the LED by making rotary movements until it comes off
- Connect the socket and proceed with locking the LED bulbs: Insert the ring lamp, already previously fixed inside the headlight, and lock it inside with rotary movements.


EXTRAS AND POSSIBLE CASES

- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not mere replacement bulbs, in RARE cases it could have a larger size. If installing the kit does not allow the headlight to be closed, visit our store for DEEPER caps.

- ADAPTERS:

Cars that do not have the CLASSIC METALLIC CLIP for locking the bulb in the headlight may require simple adapters, usually in the possession of the car electrician or easily available in OUR STORE. Unfortunately, their compatibility does not always depend on the model or year of the car, therefore it depends on your type of locking.



We do not assume responsibility for: incorrect purchases - violations of regulations or laws of each state - damage that could be caused to you, to third parties, to the Vehicle or to the item itself, as we describe every single specification in detail.

We also remind you that these are Aftermarket Items, designed for Full compatibility and operation on the designated vehicle, but they remain products that may not be permitted for use on public roads.

We trust in your common sense.

COMPATIBILITY:

- All Cars with HALOGEN H7 BULBS


FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULB

- CHECK FIRST: Connect only the LED socket (PLUG AND PLAY) to the system and switch it on; if there are no problems, proceed with the assembly

- BLOCK ONLY THE LED RING: Remove the ring from the LED by rotating it until it comes off; Lock it on the Headlight bulb holder.

- CONNECT THE SOCKET AND LOCK THE BULB: Insert the LED bulb into the ring nut (previously fixed on the headlight bulb holder) making it cross, Lock it with rotational movements.


NON-STANDARD CASES

- DEEPER DUST CAPS:
Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:
All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.

We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.

We trust in your common sense.

COMPATIBILITY:

- All cars with HALOGEN H7 BULBS



FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- LOCKING ON THE CAR LIKE THE OLD HALOGEN (IT HAS THE SAME DIMENSIONS !!)


ADVICE:

Although very powerful (8.000 lumens) and can be used as a low beam, we recommend the installation of these lamps ONLY on secondary light beams (FOG LIGHTS / HIGH BEAMS) as it was designed and built for these functions.

COMPATIBILITY:

- All Cars and Bikes with HALOGEN H7 BULBS


FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULB

- CHECK FIRST: Connect only the LED socket (PLUG AND PLAY) to the system and switch it on; if there are no problems, proceed with the assembly

- BLOCK ONLY THE LED RING: Remove the ring from the LED by rotating it until it comes off; Lock it on the Headlight bulb holder.

- CONNECT THE SOCKET AND LOCK THE BULB: Insert the LED bulb into the ring nut (previously fixed on the headlight bulb holder) making it cross, Lock it with rotational movements.


NON-STANDARD CASES

- DEEPER DUST CAPS:
Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:
All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.

We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.

We trust in your common sense.

COMPATIBILITY:

- All Cars and Bikes with HALOGEN H7 BULBS



FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- LOCKING ON THE CAR LIKE THE OLD HALOGEN (IT HAS THE SAME DIMENSIONS !!)


ADVICE:

Although very powerful (4.000 lumens) and can be used as a low beam, we recommend the installation of these lamps ONLY on secondary light beams (FOG LIGHTS / HIGH BEAMS) as it was designed and built for these functions.