A4 B8 Facelift (11-15)

Accessories and LED Lights for Audi A4 B8 11-15 Tuning | QSPCARS

Active Filters

  • Color: Anodized Steel
  • Color: Satin Black

There Are 2 Products.

Sort by:
Sales, highest to lowest Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low Reference, A to Z Reference, Z to A
Car Roof Rack Bars for Audi A4 B8 Avant ORIGINAL Nordrive Evos Silenzio | Max 100Kg. GS-TÜV
  • -5%
  • New
Add to Wishlist
Car Roof Rack Bars for Audi A4 B8 Avant ORIGINAL Nordrive Evos...
COMPATIBILITY:

- Audi A4 B8 Avant (2007-2015), with Flush Railings (Low Railings)


INSTALLATION:

- For a Perfect Installation Mount the Bars at Approximately 70cm Distance Between Them.
- For Perfect Soundproofing Mount the Bars in the rearmost possible area of the Vehicle.
- For Perfect Positioning and Centering during Assembly, consult the graduated scale on the bottom of the Bars.

- Mount the roof bars as per the instructions
- Position them on the roof with the pointed part facing backwards
- Open the locks with the key provided
- Unscrew the pin that allows the clamp to open to the maximum allowed
- Position the bars on the low rails centering them on the roof
- Tighten the pin that closes the clamp to the maximum allowed (max 6Nm)
- Close the locks and plug the remaining empty channels with the gaskets provided


ATTENTION it is good practice to carry out a control pit stop after the first 100km, then after 250km and finally after 500km.


Although simple and intuitive, FOR OPTIMAL INSTALLATION, WE ALWAYS RECOMMEND INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not assume responsibility for the item mounted and subsequently detached.
We trust in your common sense.
Add to Wishlist
€150.08 Regular Price €157.98
Front LICENSE PLATE Holder for Audi Bracket SIDE RELOCATOR In Anodized STEEL tuning
  • -1%
  • New
Add to Wishlist
Front LICENSE PLATE Holder for Audi Bracket SIDE RELOCATOR In...
COMPATIBILITY:

- For AUDI Cars

It is applicable on any vehicle with an indentation on the bumper, where it will be possible to fix the bracket (WATCH PHOTO).



ASSEMBLY:

- Put the relocation plate holder where you want to apply it, marking the points where you will need to pierce the bumper

- Once the holes have been made, fix the plate holder with the metal plate and the bolts supplied

- Remove the plate and apply it on the new relocation plate holder (1 hole may be required on the plate)




FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.

Add to Wishlist
€19.06 Regular Price €19.25