COMPATIBILITY:

- Wheels Vehicles, including Ford
- Nuts 17, 19, 21, 23

USE:

1) The bolts must be unscrewed before lifting the car, on a flat, stable and safe surface.
2) Insert the jack under the frame in the position indicated in the use and maintenance handbook.
3) Raise the jack just enough to tension it in the right position to support the car but without lifting it off the ground.
4) Remove the hubcap and loosen the nuts by turning the cross wrench counterclockwise.
5) The tire must be left in contact with the ground because in this way the force applied makes the nuts turn but not the wheel, which remains blocked by the ground.
6) The nuts must not be unscrewed completely but you must limit yourself to overcoming the resistance of the tightening.
7) Raise the car, completing the operation of unscrewing the bolts and removing the wheel which must be completed by hand.

The same operation must be done in reverse when refitting the replaced wheel, tightening the bolts last, to be carried out when the vehicle is already on the ground.

COMPATIBILITY:

- On Bodywork, Rubber, Plastics, Metals of your Ford
- Can be used on previously treated or waxed bodywork without worrying about affecting any layers


APPLICATION: 1) Possible Manual Application 2) Possible use With Foam Sprayer


1) Manual Application

- Dilute 1 Part of Active Foam in 8 Parts of Water
- Evenly apply a good layer of foam using a washing glove or sponge
- Wait 5 Minutes
- Rinse thoroughly with a high pressure cleaner


2) Application with Foam Sprayer

- Dilute 1 Part of Active Foam in 8 Parts of Water
- Evenly apply a good layer of foam using a foam sprayer
- Wait 5 Minutes
- Rinse thoroughly with a high pressure cleaner





Even if simple and intuitive FOR OPTIMAL USE, WE ALWAYS RECOMMEND THE APPLICATION OF OUR PRODUCTS BY AN EXPERT, Always Checking The Risk Label relating to Dangerous Substances, as any form of Contact could be dangerous. We trust in your common sense.

We do not assume responsibility for: erroneous purchases - violations of regulations or laws of any state - damages that you could cause to yourself, to third parties, to the Vehicle or to the article itself, as we describe every single specification in detail.

COMPATIBILITY:

- Car Interior Cleaning of your Ford
- Skin Treatment and Cleaning
- Treatment and Cleaning of Plastics and Vinyls


APPLICATION:

- Spray evenly on the surface to be treated
- Rub with a Microfiber Cloth removing Dirt and Residues
- Polish The Area With A Clean Microfiber Cloth




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On bodywork, rubber, plastics, metals of your Ford
- Can be used on previously treated or waxed bodywork without worrying about affecting any layers


APPLICATION:

- Spray evenly on the surface to be treated
- Rub with a Microfiber Cloth removing Dirt and Residues
- After 30-60 Seconds, Buff The Area With A Clean Microfiber Cloth


Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY: "Do not use on Suede Leather or Nubuck"

- Fabric Seat and Mats Cleaning of your Ford
- Fabric Cleaning and Stain Removal


APPLICATION:

- Spray evenly on the surface to be treated
- Wait a few seconds
- Absorb the liquid with a clean microfiber cloth
- To remove stains, leave it to act for a few minutes
- Absorb the liquid with a microfiber cloth
- Repeat several times until the Stain disappears




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Car Glasses, Windows, Mirrors (Internal and External) of your Ford
- It can be used without worrying about affecting painted surfaces, plastics or metals.


APPLICATION:

- Spray a small amount on the glass to be treated
- Rub with a Microfiber Cloth Removing Dirt and Residues
- Polish the area with a second clean microfiber cloth





Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Bodywork, Rubber, Plastics, Metals "After Washing" of your Ford
- Can be used on previously treated or waxed bodywork, without worrying about damaging any layers
- Do not use on glass or mirrors


APPLICATION:

- After washing the car, spray evenly on the surface to be treated
- Wait 60 Seconds
- Polish the area with a clean microfiber cloth




Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Alloy Wheels, Aluminium, Metal Wheels or Plastic Wheel Covers of your Ford
- Can Be Used On The Braking System


APPLICATION:

- Spray evenly on the surface to be treated
- Leave to act without removing it
- Remove Dirt gently with a Sponge or Rim Brush
- Rinse after about 2 minutes


Even if simple and intuitive FOR OPTIMAL USE, WE ALWAYS RECOMMEND THE APPLICATION OF OUR PRODUCTS BY AN EXPERT, Always Checking The Risk Label relating to Dangerous Substances, as any form of Contact could be dangerous. We trust in your common sense.

We do not assume responsibility for: erroneous purchases - violations of regulations or laws of any state - damages that you could cause to yourself, to third parties, to the Vehicle or to the article itself, as we describe every single specification in detail.

COMPATIBILITY:

- On Bodywork, Rubber, Plastics, Metals of your Ford
- Can be used on previously treated or waxed bodies without worrying about damaging any layers


APPLICATION:

- Dilute 20Ml of Shampoo for 10Lt of Water
- Apply Evenly and Wash with a High Quality Sponge or Brush removing Dirt and Residue
- Rinse with Clean Water
- Dry by buffing with a clean microfiber cloth or quality chamois leather




Even if simple and intuitive FOR OPTIMAL USE, WE ALWAYS RECOMMEND THE APPLICATION OF OUR PRODUCTS BY AN EXPERT, Always Checking The Risk Label relating to Dangerous Substances, as any form of Contact could be dangerous. We trust in your common sense.

We do not assume responsibility for: erroneous purchases - violations of regulations or laws of any state - damages that you could cause to yourself, to third parties, to the Vehicle or to the article itself, as we describe every single specification in detail.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- FORD C-MAX II (2010>) - LOW BEAM


CAUTION:

If your Leaks do not depend on the closure of the lighthouse, they will remain, regardless of the application of this article.

- WE TRUST YOUR COMMON SENSE
- THE PURCHASE ALWAYS REMAINS YOUR RESPONSIBILITY


ASSEMBLY INSTRUCTIONS:

- Remove the cap

- Insert the new cap using a rotary motion


FOR AN OPTIMAL MOUNTING, WE ALWAYS RECOMMENDS THE INSTALLATION BY AN EXPERT




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail. WE WILL NOT ACCEPT RETURNS FOR INCOMPATIBILITY or WRONG PURCHASES

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.

COMPATIBILITY:

- On Vehicle Ventilation Grilles, Air Vents of your Ford


APPLICATION:

- Assemble the Clip to the Perfumer
- Insert it in the Flap of the Air Vent
- Turn on the Ventilation System




Although simple and intuitive FOR AN OPTIMAL APPLICATION, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
We trust in your common sense.