1pc Festoon LED Bulb 31mm C5W Professional, Powerful White Light | 2 LED PLATES SMD 1860, with 6 LEDs each, 6.500K ICE White, 100% CANbus, Plug & Play
- Lighting of Excellence | 25 LUMEN each LED
- Ice White | 6500K
- No Errors | CANBUS
- Perfect Replacement | Plug & Play
THE PACKAGE INCLUDES:
- 1 Festoon Led Bulb 31mm x 10mm (T11 / C5W / C10W)
SUGGESTED USES:
- License Plate Lights
- Interior Lights
INFO:
Festoon LED Lamps Replace Classic Halogen Festoon, Converting from Halogen Festoon Bulb (Warm Light) into LED Festoon Bulbs (Cold Light), Mostly used as License Plate Lights and Interior Lights.
- EXTRUDED ALUMINUM: Extruded aluminum body, super resistant. Prevents oxidation and rust formation, and avoids possible bad contacts with the (dated) connectors of the car.
- ANTI ELECTRIC OVERVOLTAGE: 2 Capacitors Prevent premature burns, due to small voltage fluctuations and makes them more stable, When starting the car or on uneven surfaces, it removes shaking, intermittence and flickering
- CHIP CANBUS IC: DYNAMIC CONTROL ECU, the CANBUS element OF THE LAMP; works with the 6 resistors (hence the dynamic name) and ALLOWS THE NON PRESENCE OF THE ERROR on the on-board computer on 97% of the cars (N.B. The common LEDs DO NOT HAVE IT, ONLY WORK ON THE RESISTORS)
- 2 SMD PLATES 1860 LEDs: Type of LEDs applied to each single Chip, able to provide more 25 LUMEN with a wide range with greater intensity and brightness.
COMPATIBILITY:
- Vehicles with Halogen Festoon Bulb 31 mm (C5W / C10W / T11)
- Plug & Play installation
FOR A PERFECT INSTALLATION:
- FOR THE STABILITY OF THE BULB, AFTER REMOVING THE ORIGINAL HALOGEN BULB, FORCE THE CONNECTION HOOKS TOWARDS THE INTERNAL PART, SO TO MAKE THE CASE TIGHT ENOUGH FOR THE NEW BULBS
UNDERSTANDING PURCHASE AND HOW TO CHOOSE THE BEST:
THE DECEPTION OF LAMPS WITH MANY LEDS: The most common purchase mistake AND THE BIGGEST happens in thinking that lamps with more LEDs are better than those who have less.
The more LEDs on a plate facade, the more the distance between the LEDs is reduced, the shorter their duration, and the greater the possibility that the individual LEDs will burn immediately, leading to malfunction, short circuits, or lightning strikes
THE WORST ENEMY OF LEDs is '' HEAT '': so if there are too many LEDs on a board or they are too close together, the Heat will cause the consequences described above to happen.
Usually, this Type of Lamps uses the Aesthetic Factor of "Many LEDs" as a Shield to Use Low Quality Plates.
The greater the cooling area located behind the Lamps, the better the cooling of the same, therefore the greater the DURABILITY and RELIABILITY.