2 CANbus H15 LED Lamps | New Generation PROFESSIONAL Conversion From H15 HALOGEN to LED | 6500K Ice White | 12000 Lumen.
DOUBLE FUNCTION: DRL Daytime Running Lights + High Beam
- CANbus | No Errors
- No Changes | Same socket as your car
- Icy White Light | 6500 Kelvin Degrees
- Maximum Duration | Copper Mesh Dissipation
THE PACKAGE INCLUDES:
- 2 LED Bulbs H15
- 4 Canbus Filters and Control Units
INFO:
- PLUG & PLAY: It has H15 socket Like the Halogen, Easy installation with the Connection Only (does not require drilling or wiring adaptations)
- CANBUS: No Errors and Light Failure Indicator. Equipped with two Slim Canbus Control Units 5 Cm x 3.5 Cm x 1 Cm that Prevent Flicker and Intermittence, Making the Light Beam Stable and Powerful.
- NEW COOLING SYSTEM: Built in Aviation Aluminum for Excellent Heat Dispersion, It is Equipped with Copper Meshes that must be OPENED AND WIDEN during assembly, to allow cooling on a much wider surface "up to 3 times compared to classic LEDs ", Increasing the stability and life of the LED.
- QUALITY CHIP: Quality is synonymous with brightness and power, the single lamp is equipped with two LED CHIP LUXEON ZES (factory owned by PHILIPS) + EPISTAR, which guarantee the double function from daytime running light to high beam and is guaranteed by 40 to 60% increase in night visibility with a power of light that can reach 6000 LUMEN per lamp.
- REDUCED DIMENSIONS: The Single Lamp has a Footprint of 1 mm Greater Than the H15 Halogen, Retaining an Identical Socket that allows the PLUG & PLAY Connection Without Modifications and a Ring Equal to the Original, So you can have the same dimensions in the Housing of the Lamp holder. All this is also favored by the copper links which, flexing, do not occupy useful spaces and therefore allow the normal closure of the lighthouse.
COMPATIBILITY:
- All cars and motorcycles with HALOGEN H15 BULBS
FOR AN OPTIMUM MOUNTING, WE RECOMMEND:
- DISMOUNTING YOUR HALOGEN BULBS
- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.
- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.
- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.
- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.
NON-STANDARD CASES
- DEEPER DUST CAPS:
Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.
Hurry! Only 10 Items Left in Stock.
Data Sheet
- Type
- H15
- Color
- 6.500K Ice White Light
- Use on
- Daytime Running Lights + High Beam
- Compatibility
- WITH HALOGEN H15 BULB
- N° Pieces
- 2
- Certifications - Additional Info
- CE (EU Free Marketing)
- Dimension
- 162MM (L) - 16MM (W) - 157GR (SINGLE)
- Installation
- Plug and Play (Just Link)
- Usage
- Conversion Halogen to Led
- Package Includes
- 2 Led Bulbs, 2 Integrated Canbus Filters
- Estimated Duration
- 60.000 h (Estimated)
- Endurance
- IP 68 (High Resistance Water and Dust Proof)
- Technology
- Full LED (2 in 1) DRL + High Beam
- Heat Dissipation
- New Copper Mesh
- Material
- Aviation Aluminum 6063, Copper Heatsink, Abs Elements
- Efficiency
- 12.000 LUM (6.000+6.000), 80W (40+40), 12-24V
- Category
- LIGHTING
- Function
- Light Transformation
- Item
- Kit Full LED - Main Lights
- Socket
- H15
- Characteristic
- CANbus Error Free
- Producer - Responsible Person EU
- QUALITYSPCARS SRLS - Via Matera, 91 - Santeramo in Colle BA - PI 08118980724 - info@qspcars.it