H4 LED Kit Professional New Generation | Conversion from Halogen H4 to LED | White Ice Light 6.500K | CANbus, Error Free - Plug & Play | 8000 Lumen
- Ice White Coloring - 6500 Kelvin Degrees
- Copper Mesh Dissipation
- Same Socket as your Car
- No Error - CANbus
THE PACKAGE INCLUDES:
- 2 H4 LED Lamps
- 2 Canbus Filters (Integrated)
SUGGESTED USES:
- Low Beam + High Beam (DOUBLE FUNCTION BULB)
INFO:
- PLUG & PLAY INSTALLATION:
It has H7 socket as the standard Halogen bulb. Easy installation, it requires no drilling or wiring adaptations.
- NO ERROR:
It is CANbus, equipped with an Integrated Slim Canbus Control Unit 6.2 Cm x 3.6 Cm x 1.8 Cm
- NEW COOLING SYSTEM:
It is equipped with copper meshes, which must be OPENED AND WIDEN during assembly, which allows cooling on a much larger surface, UP TO 3 TIMES compared to classic LEDs.
- HIGH QUALITY = VERY HIGH BRIGHTNESS - 4000 LUMEN PER LAMP:
The single lamp is equipped with two LUXEON ZES LED CHIP (factory owned by PHILIPS), and is guaranteed up to 140% increase in night visibility.
NO MORE XENON BECAUSE:
- The high power of this new type of LED leads it to overtake the traditional XENON, so much so that Brand New Cars from the best car manufacturers are already adopting it on a large scale.
- Unlike Xenon, they do not have internal "consumable" gases, for this reason they are longer-lived, more reliable and never lose their original Brightness or Color over time.
- Unlike Xenon, they do not need to heat up to deliver their maximum light output, the Ignition is IMMEDIATE, as well as the response to the change between low and high beam.
COMPATIBILITY:
- All cars with HALOGEN H4 BULBS
FOR AN OPTIMUM MOUNTING, WE RECOMMEND:
- DISMOUNTING YOUR HALOGEN BULBS
- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.
- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.
- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.
- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.
NON-STANDARD CASES
- DEEPER DUST CAPS:
Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.
Data Sheet
- Type
- H4
- Color
- 6.500K Ice White Light
- Use on
- Low + High Beam
- Compatibility
- With Halogen Bulbs H4
- N° Pieces
- 2
- Certifications - Additional Info
- Consumption 44W (22+22), 12-24 Volt
- Dimension
- 170mm (LUN) - 47mm (LAR) - 80gr (SINGLE)
- Installation
- Plug and Play (Just Link)
- Usage
- Low Beam + High Beam
- Package Includes
- 2 Led Bulbs, 2 Integrated Canbus Filters
- Estimated Duration
- 30.000h (80.000 Tested) 17 More than Xenon
- Endurance
- IP 65 (Dust and Water Proof)
- Technology
- Full LED
- Heat Dissipation
- New Copper Mesh
- Material
- Aviation Aluminum ADC12, Copper Heatsink, Abs Elements
- Efficiency
- 8.000 LUM (4.000+4.000)
- Category
- LIGHTING
- Function
- Light Transformation
- Item
- Kit Full LED - Main Lights
- Socket
- H4
- Characteristic
- CANbus Error Free
- Producer - Responsible Person EU
- QUALITYSPCARS SRLS - Via Matera, 91 - Santeramo in Colle BA - PI 08118980724 - info@qspcars.it