1 CANbus Professional Filter For FULL LED HB1 TRANSFORMATION KIT | Error Free Warning, Anti Flicker Decoder | Plug & Play Chain-connected NO Modifications
(ATTENTION: Success cannot be guaranteed mathematically, but WE GUARANTEE "Satisfied or Refunded" Formula = It will be Possible to return the product for a Total Refund) READ INFO in DESCRIPTION
- Plug and Play (HB1 Connectors)
- Quality of the materials used
- It Removes the Error light
- It Removes flashes and flickers
- It Removes Radio Interference
THE PACKAGE INCLUDES:
- 1X CANbus Filter Resistor HB1
INFO:
Additional CANbus Resistor Control Unit, for Installation of HB1 LED Bulbs. Erases Errors and Malfunctions on Low or High Beam, Fog Lights etc. Built with High Resistance Materials and Finishing, with ABS Body and Connectors.
MINIMUM SIZE
It is currently the SMALLEST Electrolytic Condenser Filter on the market
IT HAS HB1 SOCKET LIKE YOUR CAR
No need of adaptations or modifications of the cables, just Plug and Play
CANBUS NO ERRORS - NO FLICKERS - NO RADIO INTERFERNCES
Equipped with 3.300uf Capacitor (Microfarad) 9-14V, Suitable for Led Kit with 15-25W absorption
HOW DOES IT WORK
Many cars after the installation of LED lamps (parcking light, turning lights, low beam...): they can detect LIGHTS FAILURES, they FLICKER WHEN STARTING THE CAR, they TURN OFF, they have a LOW POWER, and in some cases there are interferes on RADIO RECEPTION.
These phenomena are due to the car Canbus control system, which usually detects an absorption (watts of the classic halogen lamp) much higher than that of the LED, which remains paltry in comparison, and consequently detect the new lamp as burned.
This type of filter is nothing more than an electrolytic capacitor capable of increasing absorption, and filtering voltage, to evade the car's CANBUS SYSTEM
CASE OF FAILURE
It may depend on two factors; Full led absorption is much lower than stated; Canbus System is too Restrictive.
" In These Cases you can RETURN the Product for a TOTAL REFUND "
COMPATIBILITY:
- FULL LED HB1 KIT
FOR AN OPTIMAL MOUNTING, WE RECOMMEND:
- CHECK: Connect only the Sockets (PLUG AND PLAY); if there are no problems, proceed with the assembly
- CONNECT MALE SOCKET: Connect the male socket to the CAR
- CONNECT FEMALE SOCKET: Connect the Full Led Kit to the Female Socket
- CHECK: Start the vehicle to check if there are no problems, only then proceed to lock the LED bulb.
- INSTALLATION: Repeat the operation on the second headlight
It is PREFERABLE to keep the resistors out of the headlight, since the lower the overheating is, the longer the DURATION OF YOUR LED KIT WILL BE.
NON-STANDARD CASES
- DEEPER DUST CAPS:
Mounting a TRANSFORMATION kit, and not simple spare bulbs, it has bigger dimensions. If the installation of the kit does not allow the closure of the lighthouse, visit our store for the DEEPER DUST CAPS.
We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.
We also remind you that, these are Aftermarket Items, designed for full compatibility and operation on the designated vehicle, but there remain products that may not be allowed for use on the public road.
We trust in your common sense.
Hurry! Only 22 Items Left in Stock.
Data Sheet
- Type
- HB1
- Color
- Matt Black
- Use on
- Low Beams - High Beams - Fog Lights
- Compatibility
- With HB1 LED bulbs
- N° Pieces
- 1
- Certifications - Additional Info
- 40W, 9-14V
- Dimension
- 60MM (L) - 24MM (W) - 28MM (THICK) - 55GR (SINGLE)
- Installation
- Plug and Play (Just Link)
- Usage
- Led Bulb
- Package Includes
- 1 CANbus Professional Filter
- Estimated Duration
- -40°c, +65°c
- Endurance
- IP 65 (Dust and Water Proof)
- Technology
- Full LED CANbus - NO Error
- Material
- Die-cast Aluminum, Heat Shrink Sheath, PVC
- Efficiency
- Error Free, Anti flicker, Radio interference
- Category
- LIGHTING
- Function
- Light Mounting Accessories
- Item
- Anti Error Warning - Flashing
- Socket
- HB1
- Characteristic
- 3.300 Uf (Microfarad) 9-14V
- Producer - Responsible Person EU
- QUALITYSPCARS SRLS - Via Matera, 91 - Santeramo in Colle BA - PI 08118980724 - info@qspcars.it
Italiano
Inglese
Francese
Tedesco
Spagnolo
Politiche per la sicurezza
Politiche per le spedizioni
Politiche per i resi
