SET ROOF RACKS + ROOF BOX FOR SSANGYONG KORANDO II, III, XLV:
Aluminum Roof Racks | GOODYEAR Original Load Capacity 90KG | Specifically Developed for Cars with Longitudinal Handrails
+
Car Roof Box, Carbon Fiber Effect, TÜV Approved and Certified (German Inspection Body), MADE IN ITALY. Dimensions 132cm x 78cm x 34,5cm
**MAXIMUM HOOKING - Distance Between Handrails: 110Cm**
Product with a Careful Design that does not Affect the Aesthetics or Sportiness of the Vehicle on which it is Installed.
- TÜV Quality and Safety Certifications
- Excellence of Materials "Details / Touch"
- Aerodynamics and Weather Resistance Tested
- Easy Lateral Assisted Loading (Spring Lifts)
- Anti-theft System (Locking with Key + Installation from Inside)
- EASY Installation
RACKS ARE ALSO THE BASIS FOR THE ASSEMBLY OF SUPERSTRUCTURES:
Goodyear product, Brand Leader in the Sector.
Roof Bars of Excellent manufacture in the quality of materials, Finishes of Detail, Touch and Coloration, constitute THE HIGHEST RANGE of GOODYEAR product.
Maximum attention to detail, every part of contact to the car is completely covered in silicone rubber and abs, not to damage the handrails and provide a stable grip.
These Bars Are Produced and Specially Designed for Vehicles with Longitudinal Handrails, from Aerodynamics to Aesthetic Bonding.
TESTED and recommended for a travel speed on the road MAX of 130Km / h, they avoid any annoying noise or hiss during the journey.
They are manufactured in extruded aluminum, offer a high resistance to load, to travel debris and to atmospheric agents, therefore they remain very manageable but at the same time sturdy.
They are equipped with the ANTI-THEFT SYSTEM, the Double Key Lock on Both Sides guarantees a high level of security.
It is a Product with a Very Careful Design and a Reliability Tested for Transport.
INFO BOX:
TOP RANGE product of excellent quality in the choice of materials, Detail finishes, touch and color, completely MADE IN ITALY.
Its EXCELLENCE is TÜV CERTIFIED, as it meets German Quality Standards and European Requirements.
It is produced in injection polypropylene, a high-quality material in the sector. For this reason, it has a VERY HIGH RESISTANCE to atmospheric agents and thermal excursions.
The DESIGN should not be underestimated, thanks to its carefully studied and aerodynamically tested shape in the WIND TUNNEL, it does not affect the aesthetics or sportiness of the vehicle on which it is installed, offering a value also in terms of SAFETY as it DOES NOT OFFER WIND RESISTANCE on each side.
It is equipped with the ANTI-THEFT SYSTEM: the fixing from the inside of the box and the key lock ensure great security.
The ease of loading, unloading and assembly is assured with the lateral opening assisted by the two spring LIFT arms, which allow an easy opening and closing of the box.
It is a product designed and tested for over 8 years for exposure to heat, cold (from - 45 ° to + 78 °), to atmospheric agents and travel debris that looms during the journey.
COMPATIBILITY:
- For SSANGYONG KORANDO 2, 3 (97-19), with HIGH Longitudinal Handrail (See Photos)
- For SSANGYONG XLV (from 2016), with HIGH Longitudinal Handrail (See Photos)
- Maximum distance between Handrails 110CM
ASSEMBLY:
- Insert the lock key to remove the side covers and access the screws below
- Take a screwdriver and unscrew the screws, to make the feet open as much as possible
- Position the Roof Bars by hooking them to the Longitudinal Handrails
- Center the bars on the rails
- Tighten the screws of each foot until it locks correctly WITHOUT FORCE EXCESSIVELY
- Close the side covers by locking them with the key lock
- Place the roof box on the roof bars of your vehicle.
- At the base of the box, drill with a screwdriver the appropriate points, in correspondence with your bars.
- Insert the "U" brackets from the bottom towards the top, making them cross the box
- Screw with the pins supplied from inside the box, until it is correcty locked.
Although simple and intuitive FOR AN OPTIMAL ASSEMBLY, WE ALWAYS RECOMMEND THE INSTALLATION OF OUR ITEMS BY AN EXPERT
As we will not take responsibility for the assembled and subsequently detached article.
We trust in your common sense.
: V.BA.GY.4.SL.BX.1.CB.YG.2
Out of Stock
Data Sheet
Type
For Roofs with High Rails
Color
Aluminum - Black Carbon Fiber
Use on
Roof with Longitudinal Handrails
Compatibility
For SSANGYONG KORANDO 2 (97-06), KORANDO 3 (10-19), XLV (from 2016) - On Longitudinal Handrails. SEE PHOTOS
N° Pieces
3
Certifications - Additional Info
Homologation and TÜV Certification
Dimension
Racks 120 x 6 X H3 (CM) 1,55Kg | Box 132 x 78 x H34 (CM) 11 Kg